Kompensatory

SG553 Blast Forward Compensator The Clawgear Blast Forward Compensator (BFC) is designed for applications where muzzle gases need to be directed strictly forward. It significantly reduces the shooter’s and adjacent team members’ exposure to sound, blast pressure, and powder residues. Particularly suitable for use in confined environments (CQB), on shooting ranges, and during parallel team operations. The BFC features a linear compensator design with three expansion chambers. These guide muzzle gases directly forward to noticeably reduce recoil and muzzle rise. The closed-body construction optimizes the gas flow direction, enhancing user protection. Integrated breacher spikes made from hardened steel allow for barrier penetration in CQB scenarios and serve as a mounting interface for tools. Manufactured from high-strength steel and treated with a durable black surface coating, the BFC is built for long-term use under demanding operational conditions. Compatible with the Swiss Arms SG553 (M14x1 left-hand thread). Technical Specifications MaterialHardened steel FinishBlack coated DesignLinear compensator with three expansion chambers FeaturesIntegrated breacher spikes, closed-body construction CompatibilitySwiss Arms SG553 with M14x1 LH thread ThreadM14x1 left InstallationInstall using the supplied tool or a 19 mm wrench; use of a crush washer is recommended ApplicationCQB, shooting range, team operations

Starblast Flash Hider The Clawgear Starblast Flash Hider was specifically developed for tactical use under low-light conditions. Unlike muzzle brakes, which primarily reduce recoil, this device is focused on effectively suppressing muzzle flash. This significantly reduces the shooter’s visual signature and makes detection more difficult – especially on short-barreled rifles where flash intensity is typically high. The design features weight-optimizing cutouts that ensure maximum durability with minimal weight. The Starblast series is equipped with a NATO A2-compatible interface and is engineered to align concentrically with the bore axis, enabling precise and repeatable use with suppressors. These characteristics make it ideally suited for modern operational profiles in military and law enforcement environments. Technical Specifications TypeFlash Hider InterfaceNATO A2-compatible MaterialHigh-strength steel FinishHard-coated to MIL standards FeaturesWeight-optimized cutouts, short-barrel optimized, suppressor compatible ApplicationMilitary, law enforcement, tactical use

SG553 SOF Compensator The Clawgear SG553 SOF Compensator was specifically developed to meet the operational requirements of modern armed forces. It enhances weapon controllability by effectively reducing recoil and muzzle rise. The closed bottom design prevents dust and debris from being kicked up when firing from prone positions or in unprepared terrain. Its rugged construction from high-strength steel ensures reliable performance under extreme conditions. A key feature is the integrated breacher spike front made of hardened steel, allowing the user to forcibly breach doors and barriers in close-quarters environments (CQB). The internal expansion chamber directs gas pressure upwards and laterally to significantly stabilize the weapon during firing. The compensator is mounted using the included crush washer, ensuring precise alignment with the bore axis. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHigh-strength, hardened steel FinishCorrosion-resistant hard coating ThreadCompatible with SG553 (SIG/Swiss Arms) muzzle thread FeaturesClosed bottom, expansion chamber, breacher spikes InstallationMounted using crush washer; 19 mm wrench required

Starblast Flash Hider The Clawgear Starblast Flash Hider was specifically developed for tactical use under low-light conditions. Unlike muzzle brakes, which primarily reduce recoil, this device is focused on effectively suppressing muzzle flash. This significantly reduces the shooter’s visual signature and makes detection more difficult – especially on short-barreled rifles where flash intensity is typically high. The design features weight-optimizing cutouts that ensure maximum durability with minimal weight. The Starblast series is equipped with a NATO A2-compatible interface and is engineered to align concentrically with the bore axis, enabling precise and repeatable use with suppressors. These characteristics make it ideally suited for modern operational profiles in military and law enforcement environments. Technical Specifications TypeFlash Hider InterfaceNATO A2-compatible MaterialHigh-strength steel FinishHard-coated to MIL standards FeaturesWeight-optimized cutouts, short-barrel optimized, suppressor compatible ApplicationMilitary, law enforcement, tactical use

Blast Forward Compensator AR10 The Clawgear Blast Forward Compensator (BFC) AR10 was specifically developed for professional use with rifles chambered in .308 / 7.62x51 mm. As a linear compensator, it directs muzzle gases, overpressure, and noise straight forward, significantly reducing the shooter's exposure and improving comfort in confined spaces (CQB), during team operations, or on the firing line alongside others. Manufactured from high-strength steel and finished with a durable black coating, the BFC offers long service life under demanding operational conditions. Three internal expansion chambers efficiently channel the exhaust gases to reduce recoil and muzzle rise. The closed-body design prevents dust and debris from being kicked up when firing from prone positions or on loose terrain. The front section features integrated hardened steel breacher spikes, allowing the user to forcibly defeat barriers in CQB scenarios or to use the spikes as a mounting interface with the supplied tool. The compensator is installed using a crush washer, ensuring proper alignment on the barrel thread. Technical Specifications TypeLinear compensator with breacher spikes Caliber.308 / 7.62x51 mm NATO MaterialHigh-strength steel FinishCorrosion-resistant hard coating (black) Expansion Chambers3 Thread5/8" x 24 UNEF CompatibilityAR-10 platforms with standard threading (e.g., DPMS LR .308, G2, Daniel Defense DD5, Bushmaster AR-10, S&W M&P10). Not compatible with Oberland Arms OA-10. InstallationCrush washer installation; 19 mm wrench required FeaturesDirected gas deflection, closed design, CQB-capable front with breacher spikes

Blast Forward Compensator M15x1 The Clawgear Blast Forward Compensator (BFC) M15x1 was developed for professional use on platforms with a metric M15x1 muzzle thread – including HK G3, G36, HK416, and OA-10. As a linear-type compensator, it directs overpressure, muzzle gases, and sound straight forward, minimizing exposure for the shooter and nearby team members. This makes it especially effective in confined environments (CQB) and when operating alongside others on the firing line. Manufactured from hardened steel and finished with a durable black coating, the BFC is designed for long service life under harsh operational conditions. Three internal expansion chambers effectively reduce recoil and muzzle rise by optimizing gas redirection. The closed-body design prevents dust and debris from being kicked up when firing from prone positions or on loose terrain. The hardened steel breacher spikes integrated into the front allow for defeating barriers in CQB scenarios and also serve as a secure mounting point using the included tool. The compensator is installed using the supplied counter nut to ensure a tight, secure fit on the barrel. Technical Specifications TypeLinear compensator with breacher spikes Caliber7.62x51 mm / .308 (platform dependent) MaterialHardened steel FinishCorrosion-resistant hard coating (black) Expansion Chambers3 ThreadM15x1 (metric, right-hand) CompatibilityHK G3, G36, HK416, OA-10, and other platforms with M15x1 muzzle thread InstallationUsing supplied counter nut for secure barrel fit FeaturesDirected gas deflection, closed-body design, CQB-capable breacher front

Starblast Hybrid Compensator – M13x1 LH The Clawgear Starblast Hybrid Compensator combines the functions of flash hider, muzzle brake, and compensator in a single device. This hybrid design effectively reduces recoil and muzzle rise while suppressing flash. The result is improved weapon control during rapid follow-up shots and in tactical environments. Manufactured from high-strength steel, the compensator features structural cutouts for weight reduction. The matte, non-reflective surface finish supports use under varying light conditions. The A2-compatible interface allows direct attachment of standard NATO QD suppressors such as the B&T Rotex V, Steyr UMS, or B&T Blast Deflector. This variant is designed for weapons with an M13x1 left-hand thread – specifically optimized for the Steyr AUG. It uses the full thread length without a locking nut and ensures precise alignment to the bore axis, making it ideal for suppressor use. Technical Specifications TypeHybrid compensator (brake / compensator / flash hider) MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) InterfaceNATO A2 compatible (e.g. B&T Rotex V, Steyr UMS) Mounting MethodDirect thread installation without locking nut ThreadM13x1 LH Caliber5.56 mm CompatibilitySteyr AUG and compatible platforms

Two Chamber Muzzle Brake – M13x1 LH The Clawgear Two Chamber Muzzle Brake is a classic dual-chamber brake designed to significantly reduce recoil and improve weapon stability during rapid fire. It offers enhanced control and precision, making it ideal for dynamic shooting disciplines and tactical applications. Manufactured from high-strength steel, the brake features a closed bottom to prevent dust and debris from being kicked up during prone or low-angle firing. Its black, non-reflective hard coating ensures excellent resistance to thermal and mechanical stress. This variant is designed for Steyr AUG platforms with M13x1 LH muzzle thread. It is installed using the included locking nut, which ensures secure and accurate alignment along the bore axis. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodLocking nut (included) ThreadM13x1 LH Caliber5.56 mm FeatureClosed bottom to reduce dust signature CompatibilitySteyr AUG and compatible platforms Length59 mm Diameter21.93 mm Weight85 g

Starblast Hybrid Compensator – M14x1 LH The Clawgear Starblast Hybrid Compensator combines the functions of flash hider, muzzle brake, and compensator in a single device. This hybrid design effectively reduces recoil and muzzle rise while suppressing flash. The result is improved weapon control during rapid follow-up shots and in tactical environments. Manufactured from high-strength steel, the compensator features structural cutouts for weight reduction. The matte, non-reflective surface finish supports use under varying light conditions. The A2-compatible interface allows direct attachment of standard NATO QD suppressors such as the B&T Rotex V, Steyr UMS, or B&T Blast Deflector. This variant features an M14x1 LH thread with positioning notches for proper timing and alignment on AK platforms. It is compatible with AK47, AKM, RPK, AK-74, and related variants. Not compatible with AK-100 series, AKS-74U, or Saiga rifles. Technical Specifications TypeHybrid compensator (brake / compensator / flash hider) MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) InterfaceNATO A2 compatible (e.g. B&T Rotex V, Steyr UMS) Mounting MethodWith positioning notches for AK alignment ThreadM14x1 LH Caliber7.62 mm CompatibilityAK47, AKM, RPK, AK-74 and related platforms (not for AK-100, AKS-74U, Saiga)

SOF Compensator – M15x1 The Clawgear SOF Compensator is engineered for users who demand maximum control over their weapon system in real operational environments. By effectively reducing recoil and muzzle rise, it improves shot-to-shot precision and enhances weapon stability—especially on semi-automatic rifles with M15x1 muzzle threads. Made from hardened high-strength steel, the compensator is designed to withstand extreme mechanical and thermal stress. Its closed bottom prevents dust signature during prone firing, while the gas ports direct exhaust gases upward and to the sides, increasing overall stability. The integrated breacher spikes at the front allow forced entry in CQB environments and provide additional utility in tactical scenarios. The device is mounted using the included crush washer and a 19 mm wrench, ensuring precise alignment with the bore axis. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating ThreadM15x1 (right-hand) CompatibilityHK G3, G36, HK416, OA-10 and compatible platforms with M15x1 muzzle thread FeaturesClosed bottom, expansion port geometry, breacher spikes InstallationCrush washer required, 19 mm wrench (included)

Starblast Hybrid Compensator – 1/2"-28 UNEF The Clawgear Starblast Hybrid Compensator combines the functions of flash hider, muzzle brake, and compensator in a single device. This hybrid design effectively reduces recoil and muzzle rise while suppressing flash. The result is improved weapon control during rapid follow-up shots and in tactical environments. Manufactured from high-strength steel, the compensator features structural cutouts for weight reduction. The matte, non-reflective surface finish supports use under varying light conditions. The A2-compatible interface allows direct attachment of standard NATO QD suppressors such as the B&T Rotex V, Steyr UMS, or B&T Blast Deflector. This variant is designed for AR15 platforms with 1/2"-28 UNEF barrel threads and is compatible with all common .223 Rem / 5.56 mm rifles such as Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, or Steyr STM556. Not compatible with Oberland Arms OA-15. Technical Specifications TypeHybrid compensator (brake / compensator / flash hider) MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) InterfaceNATO A2 compatible (e.g. B&T Rotex V, Steyr UMS) Mounting MethodDirect thread installation with 1/2"-28 UNEF Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm CompatibilityAll standard AR15/M16 platforms with 1/2"-28 thread (not for OA-15)

Two Chamber Muzzle Brake – M14x1 LH The Clawgear Two Chamber Muzzle Brake is designed specifically for AK platforms and features a dual-chamber layout to effectively reduce recoil and improve weapon stability. It enhances control during rapid fire and supports consistent shot placement. Machined from high-strength steel and finished with a matte black hard coating, it withstands extreme thermal and mechanical stress. The closed bottom minimizes dust signature during prone shooting, while the closed top prevents distraction in the line of sight. It is fully compatible with B&T QD suppressors such as the Rotex-V. This version features an M14x1 LH thread and twelve timing notches for secure indexing on AK platforms. Installation is done by threading counterclockwise and locking the device into the next available notch using the front sight detent pin. Not compatible with AK-100 series, AKS-74U, or Saiga rifles. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodM14x1 LH with timing notches ThreadM14x1 LH Caliber7.62 mm FeaturesClosed bottom and top, compatible with B&T QD suppressors CompatibilityAK47, AKM, RPK, AK-74 and variants (not for AK-100, AKS-74U, Saiga) Length59 mm Diameter21.93 mm Weight85 g

SOF Compensator – 1/2"-28 UNEF The Clawgear SOF Compensator was developed for AR15 platforms to improve weapon control in demanding operational environments. It significantly reduces recoil and muzzle rise, providing better control and precision—especially during rapid fire and dynamic engagements. The closed bottom prevents dust signature during prone shooting, while the expansion port geometry vents gases upward and to the sides, maintaining muzzle stability. Manufactured from hardened high-strength steel, the device is built to withstand extreme thermal and mechanical stress. A key feature is the integrated breacher spike front, allowing forced entry through doors or barriers in CQB operations. Installation is done using the included crush washer and a 19 mm wrench. The A2-compatible interface allows attachment of NATO QD suppressors such as the B&T Rotex V or Steyr UMS. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm CompatibilityAll AR15/M16 platforms with 1/2"-28 UNEF (not compatible with OA-15) FeaturesClosed bottom, expansion port, breacher spikes, A2-compatible (QD-ready) InstallationMounted with crush washer, 19 mm wrench required

SOF Compensator – M14x1 LH The Clawgear SOF Compensator is specifically designed for AK platforms with M14x1 LH muzzle threads. It reduces recoil and muzzle rise to improve control and precision during rapid fire—ideal for dynamic operations and professional use in CQB scenarios. The expansion chamber directs gases upward and to the sides to stabilize the weapon, while the closed bottom prevents dust signature during prone shooting. The front is equipped with integrated breacher spikes made of hardened steel for forced entry tasks. The body is constructed from high-strength steel with a corrosion-resistant hard coating. Featuring twelve locking notches, the compensator is compatible with most AK-type front sight bases. Installation is done by screwing the device counterclockwise onto the barrel and engaging the retaining pin. Before using a suppressor, ensure the compensator is fully seated and does not move. The integrated NATO A2 interface supports QD suppressors such as the B&T Rotex V. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating ThreadM14x1 LH CompatibilityAK47, AKM, RPK, AK-74 and derivatives with M14x1 LH thread (not compatible with AK-100, AKS-74U, Saiga) FeaturesClosed bottom, expansion port geometry, breacher spikes, A2-compatible, 12 locking notches InstallationScrew on counterclockwise, engage front sight base detent pin

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the AUG SOF Compensator with the counter nut to ensure a secure fit on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: Steyr AUG A1/A2, AUG A3, AUG A3 SF, AUG P, AUG Z with thread, AUG Z A3 with thread, AUG LMG variants, AUG SA variants, F88 Austeyr, Thales EF88 / F90, MSAR STG-556Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the counter nut counterclockwise on the barrel until it stops. Screw the compensator counterclockwise on the barrel until it touches the counternut - then turn it back until the Claw Gear logo faces upwards. Tighten the counternut towards the compensator by hand and use a 19 mm wrench to secure the position.

Two Chamber Muzzle Brake – 1/2"-28 UNEF The Clawgear Two Chamber Muzzle Brake is designed for AR15 platforms and features a dual-chamber construction to significantly reduce recoil and improve weapon stability. It enhances precision and control during rapid fire in tactical environments. Manufactured from high-strength steel and finished with a non-reflective hard coating, it withstands thermal and mechanical stress. The closed bottom prevents dust signature when shooting prone, and the closed top reduces gas distraction in the line of sight. NATO A2 compatibility allows for use with B&T QD suppressors such as the Rotex-V or Steyr UMS. This version is compatible with AR15/M16 systems using a 1/2"-28 UNEF barrel thread. It is mounted using the included crush washer for precise alignment. Not compatible with Oberland Arms OA-15. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodCrush washer (included) Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm FeaturesClosed bottom and top, B&T QD compatible CompatibilityAR15/M16 with 1/2"-28 UNEF (not for OA-15) Length59 mm Diameter21.93 mm Weight85 g

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.3 Expansion ChambersThe construction guides the exhaust gases in optimal directionto reduce recoil and muzzle flip.Crush WasherMount the AR-15 US Blast Forward Compensator with the included crush washer to ensure the correct alignment on the barrel.Breacher SpikesTh ese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed Body Forwards exhaust gases and noise away from the user.CompatibilityAll AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, etc. Does not fit Oberland Arms OA-15InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the included crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the AUG SOF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySteyr AUG A1/A2, AUG A3, AUG A3 SF, AUG P, AUG Z with thread, AUG Z A3 with thread, AUG LMG variants, AUG SA variants, F88 Austeyr, Thales EF88 / F90, MSAR STG-556InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the counter nut counterclockwise on the barrel until it stops. Screw the compensator counterclockwise on the barrel so it touches the counternut - then turn it back until the Claw Gear logo faces upwards. Tighten the counternut towards the compensator by hand and use a 19 mm wrench or the included tool to secure the position.

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction, the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityAK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 Series, AKS-74U, Saiga riflesInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw the compensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.