Jackets

Brief DescriptionThe Milvago MK II Fleece Hoody offers high heat retention with its high-volume fleece material and can be worn as an insulating layer under an outer layer or as a stand-alone outer layer. Two hand pockets, two upper arm pockets with Velcro areas and an interior pocket offer storage space for equipment. The elastic cuffs and the width adjustments on the hood and hem keep the cold out.Fitmoderately slim cut, mid-layer fitFeaturesfleece material slightly heavier with high heat retentionhood with width adjustmentfront zip with inner strip and chin guardelastic cuffshem adjustment: drawstring inside the pocketPockets:2 'hand pockets' with long zip2 upper arm pockets with zip and large Velcro area to attach rank badges1 inside pocket on the left with zip and cable portProduct DescriptionThe Milvago MK II Fleece Hoody offers optimal heat retention with its high-volume fleece material and can be worn as an insulating layer under an outer shell layer or as a stand-alone exterior layer.The hood can be adjusted with a cord and keeps the neck and head warm. Behind the front zipper is an interior flap with chin protection on the collar. An extra-long zipper on the 'hand pockets' offers easy access to the pocket content. The zippered upper arm pockets are equipped with a large Velcro surface to attach rank insignia. A cable port in the inside pockets allows a cable for headphones to be routed. The elastic cuffs keep the cold out. The drawcord for the hem adjustment is inside the pocket bag, so that long cord loops don't get in the way.Product Highlightsfleece material in a slightly heavier with high heat retentionhood with adjustmentfront zip with inner strip and chin guard2 'hand pockets' with long zip2 upper arm pockets with zip1 inside pocket on the left with zip and cable portReason-to-BuyThe Milvago MK II Fleece Hoody offers high heat retention and generous storage space in two hand pockets, two upper arm pockets with Velcro area and one interior pocket. The elastic cuffs and the adjustments of the hood and hem keep the cold out. The fleece jacket can be worn as an insulating layer under an outer shell layer or as stand-alone outer layer.

Brief DescriptionThe CLAWGEAR Rapax Softshell Jacket made from a lightweight 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers a full range of motion. Two hand pockets, one chest pocket and one upper arm pocket are complemented by one inside pocket and offer sufficient storage space.Fitmoderately slim cut, midlayer fitFeaturesMaterial: 2-way stretch double-weave fabricmedium height collarfront 'Vislon' zip with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesVelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment with drawcord inside pocketPockets:2 'hand pockets' with zip1 left chest pocket with zip1 left upper arm pocket with zip1 right interior pocket with zipProduct DescriptionThe CLAWGEAR Rapax Softshell Jacket is a lightweight softshell jacket for a wide range of tactical uses as well as for everyday wear.The Vislon front zipper is covered on the inside with a flap of windproof coated microfleece material, which forms a chin guard on the upper edge of the collar.The seamless underarm gusset and the slightly pre-shaped sleeves offer complete freedom of motion.Two 'hand pockets', a chest pocket on the left and an upper arm pocket on the left - all with zips - offer generous space on the exterior for equipment. An inside pocket on the wearer's right side complements the storage space. Two Velcro patches on the upper arm allow rank insignias to be attached.The drawcord for the hem adjustment is in the pocket bag of the 'hand pockets'.Product Highlightsfabric: 2-way stretch double fabricfront 'Vislon' zipper with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesvelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment: drawcord inside the pocket4 exterior pockets, 1 interior pocketReason-to-BuyThe CLAWGEAR Rapax Softshell Jacket is a lightweight softshell jacket with a wide range of uses.The seamless underarm gussets and the slightly pre-shaped sleeves offer complete freedom of movement.4 outside pockets with zips and 1 inside pocket offer generous storage space. The cuffs and jacket hem can be adjusted.

Brief DescriptionThe CLAWGEAR Audax Softshell Jacket made from a classic 2-layer softshell material offers a wide range of uses in terms of activities and weather conditions. The seamless underarm gusset and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement. Two hand pockets and two upper arm pockets are complemented by one inside pocket. The jacket with water-repellent finish is primarily a slim-cut outer layer.Fitmoderately slim cutFeaturesfabric: 4-way stretch 2-layer laminatemedium height collarfront 'Vislon' zip with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleeveshem adjustment with drawcord from inside pocketPockets:2 'hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Audax Softshell Jacket is made of a classic 2-layer softshell material with abrasion-resistant nylon ripstop and water-repellent finish on the outside and a fleece on the inside. The moderately wind-resistant but still airpermeable material allows a wide range of use in terms of activities and weather conditions: rain is repelled, wind is moderately fended off but excess body moisture and accumulated heat is constantly and efficiently released to create an optimal body climate.A flap of a coated and windproof microfleece material behind the Vislon front zipper is keeping the wind out and forms a chin guard on the upper edge of the collar.With the seamless underarm gusset and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement.The 'hand pockets' with hidden zipper and the upper arm pockets with zipper offer generous space for equipment on the exterior. An interior pocket with a cable port on the left side complements the storage space. Two Velcro patches on the upper arm pockets allow rank insignia to be attached.The drawcord for the hem adjustment is located inside the pocket bag of the 'hand pockets'.Product Highlightsfabric: 4-way stretch 2-layer Softshell laminatefront 'Vislon' zip with windproof inner strip and chin guardseamless underarm gussetergonomically pre-shaped sleevesPockets:2 'hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 interior pocket on the left with zip and cable portReason-to-BuyThe CLAWGEAR Audax Softshell Jacket made from a 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers full freedom of movement. Two hand pockets and two upper arm pockets are complemented by an inside pocket and offer sufficient storage space.

Brief DescriptionThe CLAWGEAR Audax Softshell Hoody made from a classic 2-layer softshell material offers a wide range of uses in terms of activities and weather conditions. The seamless underarm gusset with vent zipper and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement. Two hand pockets and two upper arm pockets are complemented by one inside pocket. The jacket with water-repellent finish is primarily a slim-cut outer layer.Fitmoderately slim cutFeaturesFabric: 4-way stretch 2-layer laminateHood with 2-way adjustmentFront 'Vislon' zip with windresistant inner flap and chin guardSeamless underarm gusset2-way venting zipper in the pit gussetErgonomically pre-shaped sleevesHem adjustment with drawcord from inside pocketPockets:2 'Hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Audax Softshell Hoody is made of a classic 2-layer softshell material with abrasion-resistant nylon ripstop and water-repellent finish on the outside and a fleece on the inside. The moderately wind-resistant but still airpermeable material allows a wide range of use in terms of activities and weather conditions: rain is repelled, wind is moderately fended off but excess body moisture and accumulated heat is constantly and efficiently released to create an optimal body climate.On the 2-way adjustment of the hood, the face parameter adjustment has been moved to the inside. Also the drawcord of the hem adjustment is located inside the pocket bag, so the cord loops are not visible and the exterior of the jacket is kept clean. A flap of a coated and windproof microfleece material behind the Vislon front zipper is keeping the wind out and forms a chin guard on the upper edge of the collar.With the seamless underarm gusset and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement. A 2-way zipper under the arm allows effective ventilation.The 'Hand pockets' with hidden zipper and the upper arm pockets with zipper offer generous space for equipment on the exterior. An interior pocket with a cable port on the left side complements the storage space. Two Velcro patches on the upper arm pockets allow rank insignia to be attached.Product HighlightsFabric: 4-way stretch 2-layer Softshell laminateHood with 2-way adjustmentFront 'Vislon' zip with windproof inner strip and chin guardSeamless underarm gusset2-way venting zipper in the pit gussetErgonomically pre-shaped sleevesPockets:2 'Hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 interior pocket on the left with zip and cable portReason-to-BuyThe CLAWGEAR Audax Softshell Hoody made from a 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers full freedom of movement and high wearing comfort. Two hand pockets and two upper arm pockets are complemented by an inside pocket and offer sufficient storage space.

Brief DescriptionThe CLAWGEAR Rapax Softshell Hoody made from a lightweight 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers a full range of motion. Two hand pockets, one chest pocket and two upper arm pockets are complemented by one inside pocket and offer sufficient storage space.Fitmoderately slim cut, midlayer fitFeaturesMaterial: 2-way stretch double-weave fabrichood with 2-way adjustmentfront 'Vislon' zip with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesVelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment with drawcord inside pocketPockets:2 'hand pockets' with zip1 left chest pocket with zip2 upper arm pocket with zip1 right interior pocket with zipProduct DescriptionThe CLAWGEAR Rapax Softshell Hoody is a lightweight softshell jacket with hood for a wide range of tactical uses as well as for everyday wear. On the 2-way adjustment of the hood, the face parameter adjustment has been moved to the inside. Also the drawcord of the hem adjustment is located inside the pocket bag, so the cord loops are not visible and the exterior of the jacket is kept neat. The Vislon front zipper is covered on the inside with a flap of windproof coated microfleece material, which forms a chin guard on the upper edge of the collar. The seamless underarm gusset and the slightly pre-shaped sleeves offer complete freedom of motion. Two 'hand pockets', a chest pocket on the left and an upper arm pocket on the left - all with zips - offer generous space on the exterior for equipment. An inside pocket on the wearer's right side complements the storage space. Two Velcro patches on the upper arm allow rank insignias to be attached.Product Highlightsfabric: 2-way stretch double fabrichood with 2-way adjustmentfront 'Vislon' zipper with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesvelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment: drawcord inside the pocket4 exterior pockets, 1 interior pocketReason-to-BuyThe CLAWGEAR Rapax Softshell Hoody is a lightweight softshell jacket with a wide range of uses. The seamless underarm gussets and the slightly pre-shaped sleeves offer complete freedom of movement. 5 outside pockets with zips and 1 inside pocket offer generous storage space. The cuffs and jacket hem can be adjusted.

Brief DescriptionThe Aviceda Mk.II Fleece Hoody is a moderately insulating fleece jacket with a hood and solid features that can be worn as an insulating layer under an outer shell layer or on its own as a midlayer. Two upper arm pockets with large Velcro patches, two hand pockets, and two inside pockets offer generous storage space. Details such as a cable port in the inside pockets or the drawstring inside the pocket bag for the hem adjustment show a well thought-out design.FitModerately slim cut, mid-layer fitFeaturesLighter weight fleece materialHoodFront zip with inner flap and chin guardElastic cuffsHem adjustment: drawstring inside the pocketPockets:'Hand pockets' with zip and welded fabric frameWelded-on upper arm pockets with zip and large Velcro patchInside pockets with zip and cable portProduct DescriptionThe Aviceda Mk.II Fleece Hoody is a lightly insulating fleece jacket with solid features. The hood, which is finished with elastic band around the face, keeps the neck and head warm. Behind the smooth-running 'Vislon' front zipper is an interior flap with chin protection at the collar. Both 'hand pockets' and the upper arm pockets with a large Velcro patch for the attachment of rank insignia offer space for stowing equipment. A cable port in the inner pockets allows a cable for headphones to be routed. The drawcord of the hem adjustment is located inside the pocket bag so that long cord loops never get in the way. The elastic cuffs fit comfortably. The Aviceda Mk.II Fleece Hoody can be worn as an insulating layer under an outer shell layer or on its own as a midlayer.Product HighlightsLighter weight fleece materialHoodHem adjustment with drawstring inside the pocket4 zipped exterior pockets with zip and 2 inside pockets with zipReason-to-BuyThe Aviceda Mk.II Fleece Hoody is a lightly insulating fleece jacket with a hood that can be worn as an insulating layer under an outer layer or on its own as a standalone. Four outside pockets and two inside pockets offer generous storage space. Details such as a cable port in the inside pockets or the internal hem adjustment show a well thought-out design.

Brief DescriptionThe Aviceda Mk.II Fleece Jacket is a moderately insulating fleece jacket with solid features that can be worn as an insulating layer under an outer shell layer or on its own as a midlayer. Two upper arm pockets with large Velcro patches, two hand pockets, and one inside pocket offer generous storage space. Details such as a cable port in the inside pockets or the drawstring inside the pocket bag for the hem adjustment show a well thought-out design.Fitmoderately slim cut, mid-layer fitFeatureslighter weight Fleece materialmicrofleece lined inner collarfront zip with inner flap and chin guardelastic cuffshem adjustment: drawstring inside the pocketPockets:2 'Hand pockets' with zip and welded fabric frame2 welded-on upper arm pockets with zip and large Velcro patch1 inside pocket with zip and cable portProduct DescriptionThe Aviceda Mk.II Fleece Jacket is a lightly insulating fleece jacket with solid features. The inner collar is lined with a short-pile microfleece that better withstands friction in the neck area. Behind the smooth-running 'Vislon' front zipper is an interior flap with chin protection at the collar. Both 'hand pockets' and the upper arm pockets with a large Velcro patch for the attachment of rank insignia offer space for stowing equipment. A cable port in the inner pocket allows a cable for headphones to be routed. The drawcord of the hem adjustment is located inside the pocket bag so that long cord loops never get in the way. The elastic cuffs fit comfortably. The Aviceda Mk.II Fleece Jacket can be worn as an insulating layer under an outer shell layer or on its own as a midlayer.Product Highlightslighter weight Fleece materialmicrofleece lining inside the collarhem adjustment with drawstring inside the pocket4 zipped exterior pockets with zip and 1 interior pocket with zipReason-to-BuyThe Aviceda Mk.II Fleece Jacket is a lightly insulating fleece jacket with solid features that can be worn as an insulating layer under an outer layer or on its own as a standalone. Four outside pockets and one interior pocket offer generous storage space. Details such as a cable port in the inside pockets or the internal hem adjustment show a well thought-out design.

Brief DescriptionThe CLAWGEAR Lynx Fleece Jacket offers a high-performance material with Polartec® fleece and is technically well equipped with elaborated detail solutions: the hem adjustment moved to the inside, the windresistant front inner strip, and the wrist gaiters with thumb loops. Two hand pockets and two upper arm pockets are complemented by an interior pocket and offer generous storage space. The fleece hoody can be worn as an insulating layer under an outer layer or on its own as an outer layer.FitModerately slim cut, mid-layer fitFeaturesPolartec® fleece material with moderate heat retentionMedium height collarFront zip with windresistant inner flap and chin guardCuffs with integrated wrist gaiter and thumb loopHem adjustment: drawcord inside the pocketPockets:2 'hand pockets' with concealed zip2 upper arm pockets with zip and large Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Lynx Fleece Jacket is a technically well-equipped fleece jacket and is made of a Polartec® fleece material with high performance and good heat retention. The interior center front flap made of windproof coated microfleece material keeps the wind out behind the Vislon front zipper and forms a chin guard on the upper edge of the collar. The 'hand pockets' with hidden zippers and the upper arm pockets with zippers offer generous space for equipment on the outside. An inside pocket with a cable port on the left side complements the storage space. Two large Velcro surfaces on the upper arm pockets allow rank insignia to be attached. The wrist gaiters with thumb loops in extension of the cuffs are made of a fine but durable knit and also keep the wrist and back of the hand warm. The drawcord of the hem adjustment is located inside the pocket bag, so the cord loops are not visible and the outside of the jacket is kept clean. The fleece hoody can be worn as an insulating layer under an outer shell layer or as a stand-alone outer layer.Product HighlightsPolartec® fleece material with good heat retentionMedium height collarFront zip with windresistant inner flapCuffs with integrated wrist gaiters and thumb loopHem adjustment: drawcord inside the pocket2 'hand pockets'2 upper arm pockets with large Velcro area1 inside pocketReason-to-BuyThe CLAWGEAR Lynx Fleece Jacket is technically well equipped with well thought-out detail solutions such as a hood with 2-way adjustment, the hem adjustment operated from inside the pocket, the windproof front inner flap, and the wrist gaiters with thumb loops. The Polartec® fleece material offers high performance and comfort. Four outside pockets are complemented by one inside pocket and offer generous storage space. The fleece hoody can be worn as an insulating middle layer or as a stand-alone outer layer.

Brief DescriptionThe CLAWGEAR Lynx Fleece Hoody offers a high-performance material with Polartec® fleece and is technically well equipped with elaborated detail solutions: a hood with 2-way adjustment, the hem adjustment moved to the inside, the windproof front inner strip, and the wrist gaiters with thumb loops. Two hand pockets and two upper arm pockets are complemented by an interior pocket and offer generous storage space. The fleece hoody can be worn as an insulating layer under an outer layer or on its own as an outer layer.Fitmoderately slim cut, mid-layer fitFeaturesPolartec® fleece material with moderate heat retentionhood with 2-way adjustmentfront zip with windproof inner flap and chin guardcuffs with integrated wrist gaiter and thumb loophem adjustment: drawcord inside the pocketPockets:2 'hand pockets' with concealed zip2 upper arm pockets with zip and large Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Lynx Fleece Hoody is a technically well-equipped fleece jacket and is made of a Polartec® fleece material with high performance and good heat retention. On the 2-way adjustment of the hood, the face parameter adjustment has been moved to the inside. Also, the drawcord of the hem adjustment is also located inside the pocket bag, so the cord loops are not visible, and the exterior of the jacket is kept clean. The interior center front flap made of windproof coated microfleece material keeps the wind out behind the Vislon front zipper and forms a chin guard on the upper edge of the collar. The 'hand pockets' with hidden zippers and the upper arm pockets with zippers offer generous space for equipment on the outside. An inside pocket with a cable port on the left side complements the storage space. Two large Velcro surfaces on the upper arm pockets allow rank insignia to be attached. The wrist gaiters with thumb loops in extension of the cuffs are made of a fine but durable knit and also keep the wrist and back of the hand warm. The fleece hoody can be worn as an insulating layer under an outer shell layer or as a stand-alone outer layer.Product HighlightsPolartec® fleece material with good heat retentionhood with 2-way adjustmentfront zip with windproof inner stripcuffs with integrated wrist gaiters and thumb loophem adjustment: drawcord inside the pocket2 'hand pockets'2 upper arm pockets with large Velcro area1 inside pocketReason-to-BuyThe CLAWGEAR Lynx Fleece Hoody is technically well equipped with well-thought-out detail solutions such as a hood with 2-way adjustment, the hem adjustment operated from inside the pocket, the windproof front inner flap, and the wrist gaiters with thumb loops. The Polartec® fleece material offers high performance and comfort. Four outside pockets are complemented by one inside pocket and offer generous storage space. The fleece hoody can be worn as an insulating middle layer or as a stand-alone outer layer.