Equipment

Short DescriptionThe CLAWGEAR Operator Outer Belt was developed as a solid foundation for the equipment of soldiers, law enforcement officers, and civilian shooters. The belt combines essential features such as durability, lightweight construction, and comfort.FeaturesLightweight constructionTegris core structureLoops for additional gearModern laser-cut designPALS compatibleProduct DescriptionThe CLAWGEAR Operator Outer Belt was developed as a stable foundation for carrying equipment for soldiers, law enforcement officers, and civilian shooters. The belt is designed to be used in combination with the Inner Belt and Inner Belt LW from CLAWGEAR. It merges crucial characteristics such as robustness, lightweight construction, and wearing comfort. The low weight and high durability are achieved through the use of 500D/500D nylon laminate, which is bonded to a core made from Tegris composite material. The AustriAlpin Cobra buckle is a proven and robust fastening system that performs reliably even under the harshest conditions. Thanks to the use of Tegris and the 50 mm width, the belt offers high stiffness and allows pouches and holsters to be carried securely. Two additional webbing loops allow for the attachment of extra gear such as gloves, light sticks, etc.Product HighlightsLightweight constructionTegris composite coreAdditional loops for gearModern laser-cut designPALS compatibleReason-to-BuyModern and lightweight design as a reliable base for configuring load-bearing belts. Thanks to high-quality materials such as Tegris, the belt offers high rigidity, enabling comfortable and secure attachment of pouches and holsters. The belt is fastened with the proven AustriAlpin Cobra buckle.

Brief Description The CLAWGEAR Operator Outer Belt LW is designed to be a solid foundation for every soldier, law enforcement officer, and civilian shooter equipment. The belt combines the most important features such as durability, lightness, and comfort of use. Features Lightweight construction Construction core of Tegris Modern laser cut design PALS compatible Product Description The CLAWGEAR Operator Outer Belt LW is designed to be a solid foundation for every soldier, law enforcement officer, and civilian shooter equipment. The belt is created to work with Inner Belt and Inner Belt LW available from CLAWGEAR. The belt combines the most important features such as durability, lightness, and comfort of use. Low weight and high durability are guaranteed by the use of 500D/500D Nylon Laminate which is placed on a belt core made of Tegris composite. Woojin plastic buckle with additional fastening security ensures stability and low weight. The use of Tegris and the width of the belt, which is 50 mm, results in high stiffness and the possibility of stable carrying of pouches and holsters. Product Highlights As shown in "Features" Section Reason-to-Buy Modern and lightweight construction that is the basis for the configuration of combat belts. Thanks to the use of high-quality materials such as Tegris, it is characterized by high stiffness that allows for comfortable carrying of pouches and holsters. The belt is fastened with a proven Austriaplin Cobra buckle.

Brief Description CLAWGEAR Operator Sleeve was designed as a modular platform for configuring a combat belt. The hybrid design combines the advantages of narrow combat belts and the versatility of sleeves.  Features Modularity construction Additional anti-slip panel Modern laser cut design PALS compatible Product Description CLAWGEAR Operator Sleeve was designed as a modular platform for configuring a combat belt. The hybrid design combines the advantages of narrow combat belts and the versatility of sleeves, allowing the user to widely adjust the equipment configuration to changing needs during the performance of tasks. The construction is made of durable 500D/500D Nylon Laminate. The Operator Sleeve, together with one of the Sleeve Belts available in the CLAWGEAR offer inserted inside, guarantees comfortable use of even heavier configurations. The user receives two options for additional stabilization of the sleeve using the anti-slip panel that is included in the set or thanks to the inside hookside velcro panel in combination with one of the Inner Belts available in CLAWGEAR. The anti-slip panel will be useful when wearing the sleeve over a jacket or anorak. Product Highlights As shown in "Features" Section Reason-to-Buy Modular design that is the basis for the configuration of combat belts. Made of durable laminate. Works great with other CLAWGEAR products such as Sleeve Belts and Inner Belts.

Backward Flap magazine pouches are characterized by an unusual approach to ergonomics of magazine extraction and its protection balance. Their unique design allows them to be quickly drawn both from the closed and open position, when the elastic cord compresses them, giving them additional protection against falling out. Closing the pocket gives full protection of the magazine against its loss, while opening it does not result in any element standing in the way of its smooth extraction, wherever reaction time is crucial. Due to the design solutions used, both the opening and closing of the pocket is repetitive and intuitive. The unusual design of the pouch flap and the lack of a schematic, common appearance gives minimal protection against the seizure of magazines by unauthorized persons. Elastic cord tension can be adjusted according to user's preferences and type of magazines used.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The ELB Belt was designed to provide the lightest tactical trouser belt on the market. It can be used optional as an outer belt due to the MOLLE laser cut-outs. The unique rounded belt shape provides a better and more comfortable fit for everyday carry.Features:Made of bonded Laminate for extreme robustnessExtremely LightweightFlat buckle closure/openingLaser cut MOLLELow Profile DesignSuitable for EDCFabrics:500D Nylon bonded with NBR fabricWoojin plastic buckle

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Brief descriptionCLAWGEAR Protector Plate Carrier is Law Enforcement/Covert oriented, modular, lightweight, laser-cut platform for carrying personal ballistic protection.FeaturesDesigned to fit 10x12', SAPI Small and Medium ballistic platesQuick and easily interchangeable plate carrier partsLow profile stretch elastic cummerbundsVelcro Surface for ID patchSpacious admin pocketCLAWGEAR Uniloop cutouts for cable managementMultiple and adjustable placard mounting optionsMission profile adaptiveLow profile designProduct descriptionCLAWGEAR Protector Plate Carrier's construction as a base and overall form is very similar to the Operator and Raider. However due to the vest purpose concept some utility differences are highlighted: integrated admin pocket on the front and a snag-free, low-profile rear panel. The PALS Front Flap provides standard amount of space (3 rifle mag) for desired pouches. Flap is attached to the plate carrier with detachable 25mm buckles (hidden underneath the admin pocket), yet it might be fixed without them, permanently for less exposed profile. PALS Front Flap once detached, can be used with our 4 Point Harnesses in the role of a small Chest Rig.Low profile Protector elastic cummerbunds are designed to increase the user's mobility and comfort, maintaining minimalistic and low-profile form. In the base set, each plate carrier is equipped with shoulder QR buckle by default, however extended shoulder straps, which allow QR buckles to be removed, are available as separate accessory.Carrier's default Platebag is designed to accommodate Medium sized ballistic plates. Due to utilizing the latest materials and technology, the plate carrier’s design aims for a good balance between durability, comfort and weight.Vest is fully modular, and all the parts are interchangeable between each model.Product highlightsAs shown in "Features" SectionReason-to-BuyCLAWGEAR Protector Plate Carrier is focused around high modularity, lightweight and ergonomy. It has dedicated admin pocket. CLAWGEAR Plate Carrier project is in a long-term development – amount interchangeable of parts, and accessories will constantly grow.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Hydration Carrier Core 2L is an insulated hydration carrier pouch for up to 2L water bladders. External Webbing MOLLE allows mounting various pouches and accessories. On the inside is a loop which keeps the bladder in place, so it doesn’t slip down when getting empty.Features:Made of 500D NylonPouch is insulated to maintain the water temperatureInternal Velcro loop for keeping the bladder in placeMOLLE system compatibleFabrics:500D NylonNylon WebbingDimensions:Height: 25cmWidth: 20cmDepth: 2cm

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Brief descriptionCLAWGEAR Operator Plate Carrier is SOF/Military oriented modular, lightweight, laser-cut platform for carrying personal ballistic protection.FeaturesDesigned to fit 10x12', SAPI Small and Medium ballistic platesEasy and quick interchangeable plate carrier partsDouble-sided and stiff cummerbundsVelcro panel for ID patchCLAWGEAR Uniloop cutouts for cable managementMultiple and adjustable Pals Front Flap mounting optionsMission profile adaptiveProduct descriptionCLAWGEAR Operator Plate Carrier has been designed to allow detailed and easy adaptation for any mission profile thanks to multiple interchangeable parts and accessories.The pre-configured Operator Plate Carrier is assembled with a classic laser-cut front and rear panel which contain the plate bags. The PALS Front Flap provides a standard amount of space (3 rifle mags) for desired pouches. The flap is attached to the plate carrier with detachable 25mm buckles, yet it might be fixed permanently if more PALS space is required. Once detached, the PALS Front Flap can be used with our 4 Point Harnesses in the role of a small Chest Rig.The double-sided 3-inch TEGRIS® Operator cummerbunds are designed to increase user mobility while maintaining stability and stiffness similar to larger and heavier cummerbunds. The cummerbunds QR (Quick Release) buckles are detachable to give the user more modularity during reconfiguration. In the base set, each plate carrier is equipped with a shoulder QR buckle by default; however, extended shoulder straps, which allow QR buckles to be removed, are available as a separate accessory.The Plate Carrier's default Platebag is designed to accommodate Medium-sized ballistic plates. Due to utilizing the latest materials and technology, the plate carrier’s design aims for a good balance between durability, comfort, and weight.The vest is fully modular, and all the parts are interchangeable between each model.Product HighlightsAs shown in the "Features" SectionReason-to-BuyCLAWGEAR Operator Plate Carrier is focused on versatility, high modularity, lightweight, and ergonomics. The CLAWGEAR Plate Carrier project is in long-term development – the number of interchangeable parts and accessories will constantly grow.

Brief Description CLAWGEAR Raider Plate Carrier is a military-oriented, modular platform for carrying personal ballistic protection. FeaturesDesigned to fit 10x12', SAPI Small and Medium ballistic platesIntegrated, flat admin pocketEasy and quick interchangeable plate carrier parts2-sided, breathable, and stable cummerbundsVelcro Surface for ID patchCLAWGEAR Uniloops cutouts for cable managementMultiple and adjustable placard mounting optionsMission profile adaptive Product Description CLAWGEAR Raider Plate Carrier is provided with a hybrid combination of laser-cut and classic PALS webbing construction. The front panel has a flat admin pocket for storing commonly used equipment. The PALS Webbing Front Flap is a classic construction with standard pouch mounting capacity (3 rifle mag). PALS Webbing Front Flap is attached to the plate carrier with detachable 25mm buckles, yet it might be fixed permanently if more PALS space is required. Once detached, PALS Webbing Front Flap can be used with our 4 Point Harnesses in the role of a small Chest Rig. The Raider cummerbunds provide a large and stable mounting surface while being lightweight due to their hybrid construction. Large cut-outs ensure good breathability and weight reduction. The cummerbunds have a sturdy QR buckle closure. In the base set, each plate carrier is equipped with shoulder QR buckle by default, however extended shoulder straps, which allow QR buckles to be removed are available as separate accessory. The Plate Carrier's default Platebag is designed to accommodate Medium sized ballistic plates. Due to utilizing the latest materials and technology, the plate carrier’s design aims for a good balance between durability, comfort and weight. Vest is fully modular, and all the parts are interchangeable between each model. Product Highlights As shown in "Features" Section Reason-to-Buy CLAWGEAR Raider Plate Carrier is focused around high modularity, versatility and ergonomy. It has dedicated small utility pocket on the front. CLAWGEAR Plate Carrier project is in a long-term development - amount interchangeable of parts, and accessories will constantly grow.

Clawgear's nylon equipment is designed to increase the operator's performance and fightability. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.Modular single layered belt with a wide range of applications. Featuring 44mm Mil Spec webbing and 25mm Austrialpin Cobra buckle to provide lightweight, stable, and comfortable belt platform. Clawgear G-Hook fixing will keep the belt size in one place. Incorporated layer of bonded laminate with laser cutted PALS allows to attach additional equipment, such as first aid kit, cargo, multitool or flashlight pouches - whatever you might need to fulfill your task.Features:Made of Nylon Webbing in conjunction with bonded LaminateLaser cut MOLLECOBRA Buckle closure/openingFemale Buckle part adjustable with a Clawgear G-HookSuitable for EDCFabrics:45mm Nylon WebbingAustrialpin Cobra Buckle500D Nylon bonded with NBR fabricClawgear G-Hook

Clawgear's nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible without diminishing performance and reliability. The use of bonded Reinforced materials at the same time massively increases the durability and lifetime, maintaining a low weight.The Single Pistol Case is a padded bag for safely storing and transporting pistols and other valuable items. The bag has two large, comfortable transport handles. External MOLLE laser cut-outs for various accessories and an ID card pocket. Two Internal flat pockets for additional storage space. One inner pocket is layered with velour for Velcro attachments and organizers like the Pistol Mag Holder.Features:Designed to store a pistol or other valuablesExternal ID Card pocketTwo comfortable carry handlesMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLERemovable Padding to keep your content safeInner flat pocketElastic webbing loops for various accessoriesCompatible with a Pistol Mag HolderFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperNylon WebbingDimensions:Height: 15cmWidth: 25cmDepth: 6cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Detonator pouch is designed for common detonation cords. Multiple elastic webbing compartments allow easy cord placement and provides an easy tangle free access.The pouch can be stored either flat or rolled (bungee cord closure). It can be optional mounted with MOLLE clips by using the laser cutouts on its back.Features:Designed for Detonation cordsMade of lightweight Nylon fabricMultiple elastic webbing compartments for easy and tangle free storageFabrics:Lightweight Nylon fabricDimensions:Height: 28,5cmWidth: 21,5cm

Backward Flap magazine pouches are characterized by an unusual approach to ergonomics of magazine extraction and its protection balance. Their unique design allows them to be quickly drawn both from the closed and opened position, when the elastic cord compresses them, giving them additional protection against falling out.Closing the pocket gives full protection of the magazine against its loss, while opening it does not result in any element standing in the way of its smooth extraction, wherever reaction time is crucial. Due to the design solutions used, both the opening and closing of the pocket is repetitive and intuitive.The unusual design of the pouch flap and the lack of a schematic, common appearance gives minimal protection against the seizure of magazines by unauthorized persons.Elastic cord tension can be adjusted according to user's preferences and type of magazines used.Pouch compatible with:Most double-stack 9mm pistol magazines

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Vertical Utility Pouch Core is made to extend storage space. External webbing MOLLE allows mounting various accessories.Features:Medium Vertical Utility PouchMade of 500D NylonInternal flat pocketMOLLE system compatibleFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 18cmWidth: 15cmDepth: 7cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A single 5.56mm Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single 5.56mm Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 14cmWidth: 8cmDepth: 2,5cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A classic single Magazine Shingle with adjustable bungee cord pull tab retention. External MOLLE webbing for pouch stacking. Core line products design is focused on longevity and simplicity.Features:Designed for a single 5.56 / AK MagazineMade of 500D NylonMOLLE system compatibleAdjustable Magazine RetentionFabrics:500D NylonNylon WebbingDimensions:Height: 13cmWidth: 8,5cmDepth: 2cm

The medium-sized patch design by Clawgear, featuring exceptional craftsmanship and made from durable material. Thanks to its strong Velcro backing, the patch can be easily attached to your gear. Add a personal touch to your uniform with Clawgear’s stylish design.   Size: 50 x 50 mm Velcro backing for attachment to gear and clothing

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Hydration Carrier Core 3L is an insulated hydration carrier pouch for up to 3L water bladders. External Webbing MOLLE allows mounting various pouches and accessories. On the inside is a loop which keeps the bladder in place, so it doesn’t slip down when getting empty.Features:Made of 500D NylonPouch is insulated to maintain the water temperatureInternal Velcro loop for keeping the bladder in placeMOLLE system compatibleFabrics:500D NylonNylon WebbingDimensions:Height: 36cmWidth: 20cmDepth: 2cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The QA Two Point Sling Padded loop is a classic length adjustable two-point sling. Both sling ends have an adjustable 25mm webbing loop for attaching various sling swivels or hooks. The center section of the sling is padded for increased comfort.Features:Fully adjustable Two-point SlingPull Tab for fast length adjustmentAdjustable Webbing loops at each sling endDifferent mounting options can be added at each sling endStiff Nylon WebbingCenter Section Padded for improved comfortCompatible with all Clawgear Front/Rear End KitsFabrics:32mm Polyamide WebbingACW and ITW Nexus plastic parts

The horizontal patch design by Clawgear stands out with exceptional craftsmanship and durable materials. Thanks to the strong Velcro backing, the patch can be effortlessly attached to your gear. Add a personal touch to your uniform with Clawgear's stylish design.   Size: 85 x 50 mm Velcro backing for attachment to gear and clothing

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The LeveL 1-B Belt is a classic every day carry trouser belt made of military grade materials with a Austrialpin Cobra buckle closure.Features:Made of Nylon WebbingLightweightCOBRA Buckle closure/openingSuitable for EDCFabrics:45mm Nylon Webbing

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Vertical Utility Pouch Zipped Core is made to extend storage space. External flat zipped pocket allows for storing additional flat items, maintaining a low-profile design.Features:Medium Vertical Utility PouchMade of 500D NylonMOLLE system compatibleExternal flat zipped pocketInternal flat pocketLow Profile DesignFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 18cmWidth: 15cmDepth: 7cm

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The LeveL 1-L Belt is a classic every day carry trouser belt made of military grade materials with a Austrialpin Cobraframe closure.Features:Made of Nylon WebbingLightweightAustrialpin CobraframeSuitable for EDCFabrics:45mm Nylon Webbing

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear 5.56/AK Double Speedpouch is a hybrid construction that utilizes a double plastic retention frame to hold tight two rifle magazines without the need of a classic bungee retention pull tab, providing the user with a fast mag draw. The pouch retention is easy and fast to adjust. External MOLLE laser cut-outs allow pouch stacking.Features:Designed to hold two 5.56/AK MagazinesMade of bonded Laminate for extreme robustnessMOLLE system compatibleExternal Laser cut MOLLE for pouch stackingEasy and fast Magazine Retention adjustmentPlastic Retention Frame for tight magazine fitLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 12cmWidth: 8cmDepth: 6cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear 40mm Double Pouch is a classic 40mm grenade double pouch. The pouch is closed by a fastener and for additional security with a press buttons. Core line products design is focused on longevity and simplicity.Features:Designed to store two 40mm grenadesMade of 500D NylonMOLLE system compatibleReinforced closure/opening flapFabrics:500D NylonNylon WebbingDimensions:Height: 11cmWidth: 10cmDepth: 3cm

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A classic double Magazine Shingle with adjustable bungee cord pull tab retention. External MOLLE webbing for pouch stacking.Features:Designed for two 5.56 / AK MagazinesMade of 500D NylonMOLLE system compatibleAdjustable Magazine RetentionFabrics:500D NylonNylon WebbingDimensions:Height: 13cmWidth: 17cmDepth: 2cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Small Vertical Utility Pouch Core is made to extend storage space. External webbing MOLLE allows mounting various accessories.Features:Small Vertical Utility PouchMade of 500D NylonInternal flat pocketMOLLE system compatibleFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 12cmWidth: 10cmDepth: 6cm