Clothing

Brief description Versatile combat shirt with extensive technical features and high wearing comfort thanks to a ventilation system and the 'ATS FLEX' technology for professional use in military and police operations. Fit The elastic 'ATS FLEX' material enables a moderately slim fit accommodating a wide range of body shapes. With the ergonomically pre-shaped elbows and the seamless underarm gusset, the shirt offers unrestricted freedom of movement and high wearing comfort. Features Stand-up collar with Velcro tab at the front Front with zip with piping cover Ventilation system on chest and back Seamless underarm gusset Ergonomically shaped elbows Sleeve hem adjustment with Velcro Horizontal and vertical Velcro strips at the front for attaching rank insignia Velcro area for attaching equipment on the upper arm pockets and on the back of the collar Pockets: 2 chest pockets with side, concealed zip 2 upper arm pockets with concealed zip, fastening loops and Velcro area Product description The CLAWGEAR Operator Field Shirt MK III ATS Flex is providing high wearing comfort, functionality and freedom of movement for professional use during military and police operations. The NYCO RipStop fabric with mechanical stretch - our 'ATS FLEX' technology - consists of 57% nylon and 43% cotton and offers not only high abrasion resistance, good climate management, but also additional comfort and freedom of movement thanks to its elastic properties. The upper arm pockets with internal becketts offer plenty of storage space and their zipper entry doubles as ventilation openings on the front of the shirt. The large Velcro patches allow IFF indicators, a V-LITE® or rank insignia to be attached. Another Velcro patch is located on the back collar. The vertical ventilation openings positioned on the rear side also allow to release accumulated body heat and moisture and create optimal climate regulation. The sleeve cuff can be adjusted using Velcro. Product Highlights ‘ATS FLEX’ technology: NYCO RipStop fabric with mechanical stretch Versatile storage options in chest and upper arm pockets Ventilation system Ergonomic fit and freedom of movement YKK zippers Reason-to-Buy The CLAWGEAR Operator Field Shirt MK III ATS Flex offers high wearing comfort and freedom of movement thanks to the elastic ATS FLEX material and the ventilation system. With its high robustness and the generous storage space in the pockets, it is an essential piece of equipment for professional use.

Brief Description This combat pant meets with extensive technical features, the ceramic-reinforced abrasion protection and our ‘ATS FLEX’ technology meets the high demands of professional use in military operations and police deployments. Fit Ergonomically pre-shaped knees and seat as well as the seamless crotch gusset allow unrestricted freedom of movement. The adjustment of the knee position allows the trousers to be individually adjusted to the wearer's leg length. The concealed waistband adjustment also helps to ensure an optimal fit. Features Waistband lined with 'microfleece' on the inside Belt loops for belts up to 60 mm width Front closure with button and additional Velcro fastener Waistband adjustment with Velcro fastener Seamless crotch gusset Knee with ceramic-reinforced abrasion protection Knee area double-layered and with perimeter and vertical height adjustment Straps for attaching a tourniquet to the back of the lower leg Hem width adjustment and hook Pockets: 2 vertical 'hand pockets' with integrated compartments for smartphones or magazines, loops for storage and reinforced opening edge for hanging a pocket knife 2 small, side pockets (for magazine, knife) 2 thigh pockets with volume fold, integrated magazine compartments and storage loops Product Description The CLAWGEAR Operator Combat Pants MK III ATS Flex was designed to meet the highest demands in professional use in military operations and police deployment. Our 'ATS FLEX' technology - a NYCO RipStop fabric with mechanical stretch made of 43% cotton, 57% nylon - offers excellent climate management and high abrasion resistance. A ceramic coating on the NYCO main material provides additional protection for the knees. The waistband, lined with soft microfleece material, offers maximum comfort and can be adjusted to the perfect waist width with Velcro fasteners. The belt loops are compatible with belts up to 60 mm width. The pocket configuration was carefully designed to meet the special needs of combat operations, so that all functional components can be operated with one hand and the critical pieces of equipment are accessible quickly and easily. A smartphone pocket is integrated into the pocket bags of the hand pockets and the pocket opening is reinforced with a double layer. The vertical position of the knee area can be adjusted inside the pocket bag. The circumference in the knee area can be adjusted using an external Velcro system. The thigh pockets are accessible via a zipper covered by flaps. Loops attached inside the pocket offer further options for securing equipment. Spare magazines can be stored in two additional compartments in the thigh pocket - accessible from the outside and inside - as well as in separate welt pockets on the sides of the pant. A tourniquet can be attached to the double tabs on the back of both lower legs. The width of the pant hem can be adjusted using a drawstring. The hem hook hooked into the laces prevents the trousers from riding up. Product Highlights Extremely durable and body climate regulating material ATS FLEX Technology Versatile pocket configuration specially designed for combat use Ergonomic fit and maximum freedom of movement YKK zippers Reason-to-Buy The CLAWGEAR Operator Combat Pants MK III ATS Flex was developed in close cooperation with professionals and is, with its well-considered detailed solutions, the high durability and unsurpassed comfort by the ATS FLEX technology, an uncompromising and indispensable piece of equipment in use.

Brief Description The CLAWGEAR Raider Field Shirt MK V ATS Flex is, in comparison to the CLAWGEAR Raider Field Shirt MK V, additionally equipped with ceramic-reinforced abrasion protection and our 'ATS FLEX' technology – a NYCO RipStop fabric with mechanical stretch. This field shirt, featuring extensive pocket storage space, side zippers for holster access, maximum abrasion protection on the elbows, and climate regulation through ventilation, meets the highest demands in professional use. Fit The elastic 'ATS FLEX' material enables a moderately slim fit, accommodating a wide range of different body shapes. With the ergonomically pre-shaped elbows and the seamless underarm gusset, the shirt offers unrestricted freedom of movement and high wearing comfort. Features Shirt collar with Velcro patch on the back Button-down front panel with flap cover Zipper on both sides of the hem for easy access to the holster Ventilation system on the chest and back Seamless underarm gusset Ergonomically shaped elbow with ceramic-reinforced abrasion protection Sleeve hem adjustment with Velcro Horizontal and centered/vertical Velcro strip on the front for attaching rank insignia Velcro patch for attaching equipment on the upper arm pockets and on the back of the collar Pockets: 2 chest pockets with zipper 2 large upper arm pockets with zipper, fastening loops, and Velcro surface Product Description The CLAWGEAR Raider Field Shirt MK V ATS Flex was designed with the aim of offering the professional wearer the highest level of comfort, functionality, and freedom of movement during military and police operations. The NYCO RipStop fabric with mechanical stretch – our 'ATS FLEX' technology – consists of 57% nylon and 43% cotton and offers not only high abrasion resistance and good climate management but also additional comfort and freedom of movement thanks to its elastic properties. The area of the elbow and outer forearm is protected against abrasion by a ceramic coating on the NYCO main material. The spacious upper arm pockets with internal beckets offer versatile options for storing equipment. The large Velcro surfaces enable the attachment of IFF indicators, a V-LITE® or rank insignia. Another Velcro patch is located on the back collar. The sleeve cuff can be adjusted using Velcro. The horizontal back ventilation under the yoke seam as well as the vertical ventilation openings with mesh behind the chest pockets allow the release of accumulated body heat and moisture for optimal climate regulation. Product Highlights 'ATS FLEX' technology: NYCO RipStop fabric with mechanical stretch Versatile storage options in chest and upper arm pockets Ventilation system Ceramic-reinforced abrasion protection on the elbows Ergonomic fit and freedom of movement YKK zippers Reason-to-Buy The CLAWGEAR Raider Field Shirt MK V ATS Flex offers comfort, freedom of movement, and abrasion protection thanks to the elastic ATS FLEX material and the ceramic coating on the elbows. Its robustness, climate regulation, and generous storage space make it an essential piece of equipment for professional use.

brief description This uncompromisingly developed pant with extensive technical features, the ceramic-reinforced abrasion protection and our ‘ATS FLEX’ technology meets the high demands of professional use in military operations and police deployments. fit ergonomically pre-shaped knees and seat as well as the seamless crotch gusset allow unrestricted freedom of movement. With the adjustment of the knee position, the pant can be individually adjusted to the wearer's leg length. The concealed waistband adjustment also helps to ensure an optimal fit. Features waistband padded with ‘spacer mesh’ waistband lined with ‘microfleece’ on the inside belt loops fit belts up to 60 mm width front closure with button and additional Velcro fastener waistband adjustment with Velcro fastener seamless crotch gusset knee and ankle area with ceramic-reinforced abrasion protection double-layer knee area with perimeter and vertical height adjustment hem width adjustment and hook Pockets: 2 hand pockets with integrated compartments for smartphone and magazines as well as beckets for storage 2 rear pockets with concealed zipper 2 side pockets (for magazine, knife) 2 large thigh pockets with ‘quick-access’ zipper, integrated magazine compartments and storage loops 2 lower leg pockets for emergency kit double-layer knee area product description CLAWGEAR Raider Pant MK V ATS FLEX was designed to meet the highest demands in professional use in military and police operations. In comparison to the CLAWGEAR Raider Pant MK V, these pants are additionally equipped with ceramic-reinforced abrasion protection and our 'ATS FLEX' technology - a NYCO RipStop fabric with mechanical stretch. This fabric made of 43% cotton, 57% nylon offers good climate management in combination with high abrasion resistance. The areas of the knees and the hem line are protected by a ceramic coating on the NYCO main material. The waistband padded with spacer mesh and lined with a soft microfleece material on the inside offers maximum comfort and can be adjusted on both sides with an additional Velcro fastener. The belt loops are compatible with belts up to 60 mm wide. The pocket configuration was carefully crafted to meet the specific needs of operations: all functional components can be operated with one hand and the critical pieces of equipment are accessible quickly and easily. A smartphone pocket is integrated into the hand pockets and the pocket opening is reinforced with a double layer of the main fabric. The vertical position of the knee area can be adjusted from inside the pocket. The contents of the large cargo pockets on the thighs with flap cover can also be accessed via the vertical quick-access zipper. Loops attached inside the pocket offer further options for storing equipment. Spare magazines can be stored in two additional compartments in the thigh pocket - accessible from the outside and inside - as well as in separate welt pockets on the side. The pockets on the lower leg can accommodate a medical emergency kit. The width of the hem line can be adjusted using a hidden drawstring. The lace hook prevents the hem line from riding up. product highlights extremely durable and body climate regulating material ATS FLEX Technology ceramic-reinforced abrasion protection versatile pocket configuration specially designed for use ergonomic fit and maximum freedom of movement YKK zippers reason-to-Buy The CLAWGEAR Raider Pant MK V ATS FLEX was developed in close cooperation with professionals and is with its fine-tuned detailed solutions, the high durability by ceramic reinforcement and unsurpassed comfort by the ATS FLEX technology an uncompromising and indispensable piece of equipment in use.

Brief Description pant developed with no compromise to function, comfort and technical details for professional use in military and police operations. Fit Ergonomically pre-shaped knees and seat as well as a seamless crotch gusset allow unrestricted freedom of movement. The adjustment of the knee position allows for an individual adjustment to the wearer's leg length. The concealed waistband adjustment also helps to ensure an optimal fit. Features Waistband padded with ‘spacer mesh’ Waistband lined with ‘microfleece’ on the inside Belt loops fit belts up to 60 mm width Front closure with button and additional Velcro fastener Waistband adjustment with Velcro fastener Seamless crotch gusset Knee and inner ankle area reinforced with additional layer of 500 denier nylon Double-layered knee area with perimeter and vertical height adjustment Hem width adjustment and lace-hook Pockets: 2 hand pockets with integrated compartments for smartphone and magazines as well as beckets for storage 2 rear pockets with concealed zipper 2 side pockets (for magazine, knife) 2 large thigh pockets with ‘quick-access’ zipper, integrated magazine compartments and storage loops 2 lower leg pockets for emergency kit Product Description The CLAWGEAR Raider Pant MK V was designed to meet the highest demands in professional use in military and police operations. The high-quality NYCO material - a 50/50 mix of nylon and cotton - combines high abrasion resistance with optimal climate management. The additional layer of 500 denier nylon in the knee and inner hem area increases the resistance to abrasion. The waistband - padded with spacer mesh with soft microfleece material on the inside - offers maximum comfort and can be adjusted to the perfectly comfortable waistband width with an additional Velcro fastener on both sides. The belt loops are compatible with belts up to 60 mm width. The pocket configuration was thoughtfully drafted to meet the special needs of operations with all components working with single-hand operation and the critical parts of equipment are accessible quickly and easily. A smartphone pocket is integrated into the hand pockets and the pocket opening is reinforced with a double layer. The vertical position of the knee area can be adjusted from inside the pocket bag. The roomy cargo pockets on the thighs with flap cover can also be accessed via the vertical 'quick access' zipper. Beckets inside the pocket offer further options for secure equipment. Spare magazines can be stored in two additional compartments in the thigh pocket, accessible from the outside and inside, as well as in separate welt pockets on each side of the pant side. The pockets on the lower leg can accommodate a medical emergency kit. The circumference of the hem line can be adjusted using a cord adjustment hidden on the inside. The use of the lace-hook prevents the pant leg from riding up. Product Highlights Durable and body climate regulating material Very versatile pocket configuration specially designed for use Ergonomic fit and maximum freedom of movement YKK zippers Reason-to-Buy The CLAWGEAR Raider Pant MK V was developed in close cooperation with professionals and is with its well thought-out detail solutions, high durability and unsurpassed comfort an uncompromising and indispensable piece of equipment in use.

Brief DescriptionThis robust field shirt with extensive pocket storage space, side zippers for holster access and climate regulation through ventilation meets the highest demands in professional use.FitWith a moderately slim fit, ergonomically pre-shaped elbows and seamless underarm gussets, the shirt offers unrestricted freedom of movement and high wearing comfort.Features Shirt collar with Velcro on the backButtoned front panel with coverZipper on both sides of the hem for easy access to the holsterVentilation system on the chest and backSeamless underarm gussetErgonomically shaped elbowSleeve hem adjustment with VelcroHorizontal and centered/vertical Velcro strip on the front for attaching rank insigniaVelcro surface for attaching equipment on the upper arm pockets and on the back of the collarPockets:2 chest pockets with zipper2 large upper arm pockets with zipper, fastening loops and Velcro surfaceProduct DescriptionThe CLAWGEAR Raider Field Shirt MK V was designed with the aim of offering the professional wearer the highest level of comfort, functionality and freedom of movement during military operations and police operations.The NYCO RipStop with a 50/50 mix of nylon and cotton offers an optimal ratio of moderate material weight and high tear strength and resistance to abrasion.The spacious upper arm pockets with internal beckets offer versatile options for storing equipment. The large Velcro surfaces on the upper arm allow the attachment of IFF indicators, a V-LITE® or rank insignia. Another Velcro patch is located on the back collar.The sleeve cuff can be adjusted using Velcro.The horizontal back ventilation under the collar and the vertical ventilation openings with 'mesh' behind the chest pockets allow to release body heat and moisture for optimal climate regulation.Product HighlightsOptimal ratio of moderate material weight to high durability thanks to RipStop fabric, robust and comfortableVersatile storage options in chest and upper arm pocketsVentilation systemErgonomic fit and freedom of movementYKK zippersReason-to-BuyThe CLAWGEAR Raider Field Shirt MK V was particularly developed for the special needs of combat operations and is an essential piece of equipment for professional use thanks to its robustness, climate regulation and generous storage space.

Brief Description With its technical features and high level of comfort, the CLAWGEAR Operator Combat Shirt MK III ATS Flex is particularly suitable for professional use in military and police operations. The NYCO RipStop fabric with mechanical stretch - our 'ATS FLEX' technology - not only offers high abrasion resistance and good climate management, but also high freedom of movement thanks to its elastic properties. Fit The elastic knitted material in the torso, the ergonomically pre-shaped elbows and the seamless underarm gusset allow unrestricted freedom of movement. The Velcro adjustment on the elbow and the cuffs allows the sleeve circumference to be individually adjusted. Features longer ¼ front zip stand-up collar ergonomically shaped, double-layered elbows Velcro adjustment on the sleeve hem seamless underarm gusset Velcro area for attaching equipment to the upper arm and back collar Pockets: 2 flat upper arm pockets with concealed zip and inside and outside fastening loops interior compartments for shoulder padding Product Description The CLAWGEAR Operator Combat Shirt MK III ATS FLEX was designed with the high requirements of professional use in military and police operations in mind. A NYCO RipStop fabric with mechanical stretch - our 'ATS FLEX' technology - in the sleeves was combined with a knit made of 50% cotton, 39% modacrylic and 10% viscose in the torso. This ensures optimal climate management on the body and under the plate carrier as well as high abrasion resistance in the shoulder and sleeve area. The upper arm pocket is accessible via a zipper and allows equipment to be secured on internal pockets. Velcro patches and pockets also on the outside allow IFF indicators and a V-LITE® to be attached as well as a tourniquet to be threaded in. Another Velcro surface is located on the back collar. The sleeve circumference on the double-layered elbow and on the sleeve hem can be seamlessly adjusted using Velcro closure. Inserting shoulder pads into the internal compartments helps distribute the load of shoulder straps. The pocket configuration and the placement of the seams were specifically designed for the special needs of combat and for wearing under ballistic or stab-proof vests. Product Highlights fabric hybrid with strategically placed material robust and comfortable optimized pocket configuration and sophisticated detail solutions ergonomic fit and freedom of movement YKK zippers Reason-to-Buy The CLAWGEAR Raider Combat Shirt MK V ATS FLEX, with its functional construction details, material combination and good freedom of movement, is an indispensable piece of equipment for professional use.

Brief Description With its extensive technical features and high level of comfort, the CLAWGEAR Raider Combat Shirt MK V ATS Flex is particularly suitable for professional use in military and police operations. In comparison to the CLAWGEAR® Raider Combat Shirt MK V, the MK V ATS Flex shirt is additionally equipped with ceramic-reinforced elbows and our 'ATS FLEX' technology - a NYCO RipStop fabric with mechanical stretch. Fit The elastic knitted material in the torso, the ergonomically pre-shaped elbows, and the seamless underarm gusset allow unrestricted freedom of movement. The Velcro adjustment on the elbow and the cuffs allows the sleeve circumference to be individually adjusted. Features ¼ front zip Stand-up collar Ergonomically shaped, double-layered and with ceramic-enforced elbow Velcro adjustment on the elbow Velcro adjustment on the sleeve cuffs Seamless underarm gusset Velcro patches for attaching equipment to the upper arm and back collar Pockets: 2 large upper arm pockets with internal and external becket Compartments for shoulder padding Product Description The CLAWGEAR Raider Combat Shirt MK V ATS FLEX was designed to meet the high demands in professional use in military and police operations. A NYCO RipStop fabric with mechanical stretch - our 'ATS FLEX' technology - in the sleeves was combined with a knit made of 50% cotton, 39% modacrylic, and 10% viscose in the torso. This ensures optimal climate management on the body and under the plate carrier as well as maximum abrasion resistance in the shoulder and sleeve area. The area of the elbow and outer forearm offers additional resistance against abrasion by a ceramic coating applied to the NYCO main material. The upper arm pocket with a large loading volume is accessible via a zipper and allows equipment to be secured on internal loops. Velcro patches and becket on the outside allow IFF indicators and a V-LITE® to be attached, as well as a tourniquet to be threaded in. Another Velcro patch is located on the back collar. The sleeve circumference on the double-layered elbow and the sleeve cuff can be seamlessly adjusted using Velcro closure. Inserting shoulder pads into the internal compartments helps distribute the load of shoulder straps. The pocket configuration and the placement of the seams were specifically designed for the special needs of combat use and for wearing under ballistic protective or stab-proof vests. Product Highlights Fabric hybrid with strategically placed materials Robust and comfortable Optimized pocket configuration and refined detail solutions Ergonomic fit and freedom of movement Reason-to-Buy The CLAWGEAR Raider Combat Shirt MK V ATS FLEX was developed in close cooperation with professionals and is, with its functional design details and exceptional comfort and freedom of movement, an indispensable piece of equipment for professional use.

Brief Description Versatile combat shirt with extensive technical features and high wearing comfort for professional use in military and police operations. Fit The elastic knit material in the torso, the ergonomically pre-shaped elbows, and the seamless pit gusset allow unrestricted freedom of movement. The Velcro adjustment on the elbows and cuffs allows for individual sleeve width adjustment. Features ¼ front zipper Stand-up collar Elbow area double-layered and reinforced with 500 denier nylon Velcro adjustment on the elbow Seamless underarm gusset Velcro adjustment on the cuff Velcro area to attach gear to the upper arm and back collar Pockets: 2 large upper arm pockets with inside and outside beckets Compartments on the shoulders to insert pads Product Description The CLAWGEAR Raider Combat Shirt MK V was designed to meet the high demands of professional use in military and police operations. The materials were strategically placed: a 50/50% mix of nylon and cotton was used in the sleeves, while the torso features a knit made of 50% cotton, 39% modacrylic, and 10% viscose. This ensures optimal climate management on the body and under the plate carrier, as well as maximum abrasion resistance in the shoulder and sleeve area. The additional layer of 500 denier nylon on the elbow provides the necessary high resistance to abrasion. The upper arm pocket with a large loading volume is accessible via a zipper and allows equipment to be secured on internal loops. Velcro patches and beckets on the outside enable attachment of IFF indicators, a V-LITE®, or threading in a tourniquet. Another Velcro patch is located on the rear collar. The sleeve circumference on the double-layered elbow and sleeve hem can be seamlessly adjusted using the Velcro closure. Inserting shoulder pads into the internal compartments helps distribute the load of shoulder straps. The pocket configuration and the placement of the seams were specifically designed for the special needs of combat use and for wearing under ballistic protective or stab-proof vests. Product Highlights Hybrid construction with strategic material placement Robust and comfortable Optimized pocket configuration and sophisticated detail solutions Ergonomic fit and freedom of movement YKK zipper Reason-to-Buy The CLAWGEAR Raider Combat Shirt MK V was developed in close cooperation with professionals. With its functional design details and exceptional comfort and freedom of movement, it is an indispensable piece of equipment for professional use.

Brief description With 7 pockets and hidden compartments, the CLAWGEAR Denim Tactical Flex Jeans offers storage for equipment and spare magazines for professional use in covert operations or simply in everyday life. Fit Regular Features Reinforced edges on the 'hand pockets' Loop for attaching a magazine in the front outer pocket Silicone strips inside the rear pockets to secure the content Material: elastic, quick-drying, and robust Pockets: Classic '5-pocket' configuration on the exterior: 2 'hand pockets' 1 small pocket on the right side 2 patched-on pockets on the rear Hidden interior pocket for passport, money, ID card etc. Hidden pocket on the center back/interior for a 30rds magazine or a pair of handcuffs Product description The CLAWGEAR Denim Tactical Flex Jeans is the wolf in sheep's clothing: with 7 versatile pockets and hidden compartments, these seemingly normal jeans have special features for professional use in covert operations or in everyday life at the shooting range. In both 'hand pockets' there is an elastic loop to store a pistol magazine. There is space for a 30rds rifle magazine in an internal compartment in the inside center back. A passport, money or an ID card can be stored in an internal pocket on the right side. The belt loops are compatible with a 50 mm wide belt. The stretch denim is durable and comfortable, and the material mix offers a high level of comfort. Product highlights Storage options for 2 pistol and 1 rifle magazine Silicone strips inside the rear pockets keeping the contents of the pockets securely stored Material: elastic, quick-drying, and durable Hidden inside pocket for passport, money, ID card, etc. Hidden compartment on the center back/interior for a 30rds magazine or a pair of handcuffs Reason-to-Buy Jeans with high wearing comfort and extensive special features for professional use in covert operations or in everyday life.

Brief DescriptionThe Clawgear Pieca Shirt LS is a versatile, classic shirt made of a cotton blend that is very comfortable to wear and has a generous pocket configuration. 5 outside pockets offer storage space for equipment and knick-knack. With the roll-up sleeves, the shirt is versatile and practical for everyday use and on deployment.FitregularFeaturesclassic shirt collarbutton front placketclassic shirt cuffs with slit and second buttontab with button on the upper arm for rolling up the sleevePockets:2 large chest pockets with buttoned placket2 chest pockets behind them with hidden zipper1 upper arm pocket with hidden zipperProduct DescriptionThe Clawgear Pieca Shirt LS, with a classic buttoned front placket and shirt collar, has the potential to become a favorite piece thanks to its wearing comfort and generous pocket configuration. The cotton-blended fabric is pleasant on the skin and dries quickly. A wallet or ID/credit cards can be safely stored in 2 chest pockets with hidden zips. There is also room for slightly larger items in the large chest pockets with buttoned flaps and box pleats. The pocket on the left upper arm with a hidden zip offers additional storage space. A second button on the classic cuffs with a slit allows adjustment to different widths around the wrist. The sleeve can be rolled up above the elbow and secured there with a buttoned tab. The shirt is therefore very versatile and scores points for comfort and functionality.Product Highlightsclassic shirt collar with button front placketclassic shirt cuffs with slit and second buttontab with button on the upper arm for rolling up the sleeve2 large chest pockets with buttoned placket2 chest pockets behind them with hidden zipper1 upper arm pocket with hidden zipperReason-to-BuyThe Clawgear Pieca Shirt LS is a versatile, classic shirt made of a cotton blend that is very comfortable to wear and offers generous storage space with 5 exterior pockets. With the sleeves that can be rolled up, the shirt is versatile and practical for everyday use and on the job.

Brief description The CLAWGEAR Basic Tee LS is a versatile short-sleeved shirt that combines quick-drying and skin-friendly properties with high wearing comfort. Fit Moderately fitted Features Roundneck Material blend combines quick-drying and skin-friendly properties Product description The CLAWGEAR Basic Tee LS is the versatile, next-to-skin layer all year round and for all activities. The blend of 60% cotton and 40% polyester offers both: skin comfort and the fast-drying properties of synthetic fibers. The Tee is a staple item with high wearing comfort under all layers. Product highlights Versatile long-sleeve shirt Material blend combines quick-drying and skin-friendly properties Reason-to-Buy Versatile, quick-drying garment with high wearing comfort in many colors for every closet.

Brief description The CLAWGEAR Basic Tee is a versatile short-sleeved shirt that combines quick-drying and skin-friendly properties with high wearing comfort. Fit Moderately fitted Features Roundneck Material blend combines quick-drying and skin-friendly properties Product description The CLAWGEAR Basic Tee is the versatile, next-to-skin layer all year round and for all activities. The blend of 60% cotton and 40% polyester offers both: skin comfort and the fast-drying properties of synthetic fibers. The Tee is a staple item with high wearing comfort under all layers. Product highlights Versatile short-sleeve shirt Material blend combines quick-drying and skin-friendly properties Reason-to-Buy Versatile, quick-drying staple item with high wearing comfort in many colors for every closet.

Specifically designed to extend the MK.III Combat Shirt. The Breacher Hood has wired brim and elasticated toggle adjustments. It attaches quickly and easily using velcro. Prevents debris, dirt and weather from irritating your neck.

Brief DescriptionThe Milvago MK II Fleece Hoody offers high heat retention with its high-volume fleece material and can be worn as an insulating layer under an outer layer or as a stand-alone outer layer. Two hand pockets, two upper arm pockets with Velcro areas and an interior pocket offer storage space for equipment. The elastic cuffs and the width adjustments on the hood and hem keep the cold out.Fitmoderately slim cut, mid-layer fitFeaturesfleece material slightly heavier with high heat retentionhood with width adjustmentfront zip with inner strip and chin guardelastic cuffshem adjustment: drawstring inside the pocketPockets:2 'hand pockets' with long zip2 upper arm pockets with zip and large Velcro area to attach rank badges1 inside pocket on the left with zip and cable portProduct DescriptionThe Milvago MK II Fleece Hoody offers optimal heat retention with its high-volume fleece material and can be worn as an insulating layer under an outer shell layer or as a stand-alone exterior layer.The hood can be adjusted with a cord and keeps the neck and head warm. Behind the front zipper is an interior flap with chin protection on the collar. An extra-long zipper on the 'hand pockets' offers easy access to the pocket content. The zippered upper arm pockets are equipped with a large Velcro surface to attach rank insignia. A cable port in the inside pockets allows a cable for headphones to be routed. The elastic cuffs keep the cold out. The drawcord for the hem adjustment is inside the pocket bag, so that long cord loops don't get in the way.Product Highlightsfleece material in a slightly heavier with high heat retentionhood with adjustmentfront zip with inner strip and chin guard2 'hand pockets' with long zip2 upper arm pockets with zip1 inside pocket on the left with zip and cable portReason-to-BuyThe Milvago MK II Fleece Hoody offers high heat retention and generous storage space in two hand pockets, two upper arm pockets with Velcro area and one interior pocket. The elastic cuffs and the adjustments of the hood and hem keep the cold out. The fleece jacket can be worn as an insulating layer under an outer shell layer or as stand-alone outer layer.

KurzbeschreibungDas CLAWGEAR Instructor Shirt MK II LS wurde primär für die Verwendung auf Schießständen und bei Instruktionsdiensten entwickelt. Ein Strickmaterial mit den hautfreundlichen Eigenschaften von Baumwolle wird in diesem Materialhybrid mit einem elastischen Nylon-Gewebe kombiniert, das eine erhöhte Abriebfestigkeit bietet. Das Shirt verfügt über zwei Ärmel-Taschen sowie zwei Taschen im Seitenpanel. Der nahtlose Unterarmzwickel sowie der vorgeformte Ärmel bieten hohen Tragekomfort und Bewegungsfreiheit.Das Shirt vereint Komfort mit Funktionalität und Vielseitigkeit.Passformmoderat schmal geschnittenAusstattungMaterialhybrid: Baumwoll/Lyocell Strick + Nylon/Elastan GewebeRundhalsausschnittRaglanärmelnahtloser Unterarmzwickelergonomisch vorgeformter ÄrmelKlett Streifen auf der linken Brust für Rangabzeichen oder NamensschildTaschen:2 Oberarmtaschen mit Reißverschluss und großem Klettbereich2 Smartphone Taschen mit Kabelführung im SeitenpanelProduktbeschreibungDas CLAWGEAR Instructor Shirt MK II LS ist ein vielseitig nutzbares Langarm-Shirt mit Rundhalsausschnitt und wurde primär für die Verwendung auf Schießständen und bei Instruktionsdiensten entwickelt. Beide Ärmel verfügen über eine Oberarm-Tasche, die mit einem Reißverschluss verschlossen werden kann. Eine Tasche für ein Smartphone wurde beidseitig im Seitenpanel platziert. Der nahtlose Unterarmzwickel sorgt für reibungsfreien Tragekomfort. Eine große Klettfläche auf beiden Ärmel-Taschen sowie ein Klettstreifen auf der linken Brust dient zur Befestigung von Rangabzeichen oder Namensschildern.Bei diesem Material-Hybrid Konzept wurde das Strickmaterial mit den hautfreundlichen Eigenschaften von Baumwolle am Torso und im Seitenpanel platziert. Ein elastisches Nylon-Gewebe in den ergonomisch vorgeformten Ärmeln verbindet erhöhte Resistenz gegen Reibung mit Bewegungsfreiheit. Das Shirt vereint Komfort mit Funktionalität und Vielseitigkeit.Produkt HighlightsMaterialhybrid: Baumwoll/Polyester Strick + Nylon/Elastan Gewebenahtloser Unterarmzwickelergonomisch vorgeformter ÄrmelKlett Bereiche für Rangabzeichen oder Namensschild2 Oberarmtaschen mit Reißverschluss und großem Klettbereich2 Smartphone Taschen mit Kabelport im SeitenpanelReason-to-BuyDas CLAWGEAR Instructor Shirt MK II LS vereint Komfort, Funktionalität und Vielseitigkeit und wurde primär für die Verwendung auf Schießständen und bei Instruktionsdiensten entwickelt. In diesem Materialhybrid wird ein Baumwoll/Polyester-Mischstrickgewebe mit einem elastischen Nylon-Gewebe kombiniert. Zwei Ärmel-Taschen sowie zwei Taschen im Seitenpanel bieten Stauraum. Der nahtlose Unterarmzwickel sowie der vorgeformte Ärmel bieten hohen Tragekomfort und Bewegungsfreiheit.

Brief DescriptionThe Clawgear CG Logo Zip Hoodie is an ultra-comfortable sweatshirt jacket made from a cozy knit brushed on the inside. With a classic hood, wide rib knit on cuffs and hem, and two large front pockets, this hoodie has the potential to become a favorite!Fitslim fitFeatureshood with wide drawstringsfront zip with narrow coverwide rib knit on cuffs and hemscreen-printed logo on the left chestPockets:2 large pocketsProduct DescriptionThe Clawgear CG Logo Zip Hoodie is an ultra-comfortable sweatshirt jacket made from a cozy knit brushed on the inside. The classic hood is equipped with wide drawstrings. A wide rib knit on the hem and cuffs creates a comfortable finish. The front zipper is covered with narrow flaps of main fabric on both sides. The two front pockets can be used to warm up your hands or to store items. A hoodie with the potential to become a favorite!Product Highlightshood with wide drawstringswide rib knit on the cuffs and hemscreen-printed logo on the left chest2 large pocketsReason-to-BuyThe Clawgear CG Logo Zip Hoodie made from a cozy knit brushed on the inside has the potential to become a favorite piece with a classic hood, wide ribbed knit waistband, and two large front pockets!

Brief DescriptionThe CLAWGEAR Rapax Softshell Jacket made from a lightweight 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers a full range of motion. Two hand pockets, one chest pocket and one upper arm pocket are complemented by one inside pocket and offer sufficient storage space.Fitmoderately slim cut, midlayer fitFeaturesMaterial: 2-way stretch double-weave fabricmedium height collarfront 'Vislon' zip with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesVelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment with drawcord inside pocketPockets:2 'hand pockets' with zip1 left chest pocket with zip1 left upper arm pocket with zip1 right interior pocket with zipProduct DescriptionThe CLAWGEAR Rapax Softshell Jacket is a lightweight softshell jacket for a wide range of tactical uses as well as for everyday wear.The Vislon front zipper is covered on the inside with a flap of windproof coated microfleece material, which forms a chin guard on the upper edge of the collar.The seamless underarm gusset and the slightly pre-shaped sleeves offer complete freedom of motion.Two 'hand pockets', a chest pocket on the left and an upper arm pocket on the left - all with zips - offer generous space on the exterior for equipment. An inside pocket on the wearer's right side complements the storage space. Two Velcro patches on the upper arm allow rank insignias to be attached.The drawcord for the hem adjustment is in the pocket bag of the 'hand pockets'.Product Highlightsfabric: 2-way stretch double fabricfront 'Vislon' zipper with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesvelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment: drawcord inside the pocket4 exterior pockets, 1 interior pocketReason-to-BuyThe CLAWGEAR Rapax Softshell Jacket is a lightweight softshell jacket with a wide range of uses.The seamless underarm gussets and the slightly pre-shaped sleeves offer complete freedom of movement.4 outside pockets with zips and 1 inside pocket offer generous storage space. The cuffs and jacket hem can be adjusted.

Brief DescriptionThe CLAWGEAR Audax Softshell Jacket made from a classic 2-layer softshell material offers a wide range of uses in terms of activities and weather conditions. The seamless underarm gusset and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement. Two hand pockets and two upper arm pockets are complemented by one inside pocket. The jacket with water-repellent finish is primarily a slim-cut outer layer.Fitmoderately slim cutFeaturesfabric: 4-way stretch 2-layer laminatemedium height collarfront 'Vislon' zip with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleeveshem adjustment with drawcord from inside pocketPockets:2 'hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Audax Softshell Jacket is made of a classic 2-layer softshell material with abrasion-resistant nylon ripstop and water-repellent finish on the outside and a fleece on the inside. The moderately wind-resistant but still airpermeable material allows a wide range of use in terms of activities and weather conditions: rain is repelled, wind is moderately fended off but excess body moisture and accumulated heat is constantly and efficiently released to create an optimal body climate.A flap of a coated and windproof microfleece material behind the Vislon front zipper is keeping the wind out and forms a chin guard on the upper edge of the collar.With the seamless underarm gusset and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement.The 'hand pockets' with hidden zipper and the upper arm pockets with zipper offer generous space for equipment on the exterior. An interior pocket with a cable port on the left side complements the storage space. Two Velcro patches on the upper arm pockets allow rank insignia to be attached.The drawcord for the hem adjustment is located inside the pocket bag of the 'hand pockets'.Product Highlightsfabric: 4-way stretch 2-layer Softshell laminatefront 'Vislon' zip with windproof inner strip and chin guardseamless underarm gussetergonomically pre-shaped sleevesPockets:2 'hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 interior pocket on the left with zip and cable portReason-to-BuyThe CLAWGEAR Audax Softshell Jacket made from a 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers full freedom of movement. Two hand pockets and two upper arm pockets are complemented by an inside pocket and offer sufficient storage space.

Brief DescriptionThe CLAWGEAR Audax Softshell Hoody made from a classic 2-layer softshell material offers a wide range of uses in terms of activities and weather conditions. The seamless underarm gusset with vent zipper and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement. Two hand pockets and two upper arm pockets are complemented by one inside pocket. The jacket with water-repellent finish is primarily a slim-cut outer layer.Fitmoderately slim cutFeaturesFabric: 4-way stretch 2-layer laminateHood with 2-way adjustmentFront 'Vislon' zip with windresistant inner flap and chin guardSeamless underarm gusset2-way venting zipper in the pit gussetErgonomically pre-shaped sleevesHem adjustment with drawcord from inside pocketPockets:2 'Hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Audax Softshell Hoody is made of a classic 2-layer softshell material with abrasion-resistant nylon ripstop and water-repellent finish on the outside and a fleece on the inside. The moderately wind-resistant but still airpermeable material allows a wide range of use in terms of activities and weather conditions: rain is repelled, wind is moderately fended off but excess body moisture and accumulated heat is constantly and efficiently released to create an optimal body climate.On the 2-way adjustment of the hood, the face parameter adjustment has been moved to the inside. Also the drawcord of the hem adjustment is located inside the pocket bag, so the cord loops are not visible and the exterior of the jacket is kept clean. A flap of a coated and windproof microfleece material behind the Vislon front zipper is keeping the wind out and forms a chin guard on the upper edge of the collar.With the seamless underarm gusset and the slightly pre-shaped sleeves in combination with the 4-way stretch material, the jacket offers full freedom of movement. A 2-way zipper under the arm allows effective ventilation.The 'Hand pockets' with hidden zipper and the upper arm pockets with zipper offer generous space for equipment on the exterior. An interior pocket with a cable port on the left side complements the storage space. Two Velcro patches on the upper arm pockets allow rank insignia to be attached.Product HighlightsFabric: 4-way stretch 2-layer Softshell laminateHood with 2-way adjustmentFront 'Vislon' zip with windproof inner strip and chin guardSeamless underarm gusset2-way venting zipper in the pit gussetErgonomically pre-shaped sleevesPockets:2 'Hand pockets' with hidden zip2 upper arm pockets with zip and Velcro area to attach rank badges1 interior pocket on the left with zip and cable portReason-to-BuyThe CLAWGEAR Audax Softshell Hoody made from a 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers full freedom of movement and high wearing comfort. Two hand pockets and two upper arm pockets are complemented by an inside pocket and offer sufficient storage space.

Brief DescriptionThe CLAWGEAR Rapax Softshell Hoody made from a lightweight 4-way stretch softshell material offers a wide range of use in terms of activities and weather conditions. With the seamless underarm gusset and the slightly pre-shaped sleeves, the jacket offers a full range of motion. Two hand pockets, one chest pocket and two upper arm pockets are complemented by one inside pocket and offer sufficient storage space.Fitmoderately slim cut, midlayer fitFeaturesMaterial: 2-way stretch double-weave fabrichood with 2-way adjustmentfront 'Vislon' zip with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesVelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment with drawcord inside pocketPockets:2 'hand pockets' with zip1 left chest pocket with zip2 upper arm pocket with zip1 right interior pocket with zipProduct DescriptionThe CLAWGEAR Rapax Softshell Hoody is a lightweight softshell jacket with hood for a wide range of tactical uses as well as for everyday wear. On the 2-way adjustment of the hood, the face parameter adjustment has been moved to the inside. Also the drawcord of the hem adjustment is located inside the pocket bag, so the cord loops are not visible and the exterior of the jacket is kept neat. The Vislon front zipper is covered on the inside with a flap of windproof coated microfleece material, which forms a chin guard on the upper edge of the collar. The seamless underarm gusset and the slightly pre-shaped sleeves offer complete freedom of motion. Two 'hand pockets', a chest pocket on the left and an upper arm pocket on the left - all with zips - offer generous space on the exterior for equipment. An inside pocket on the wearer's right side complements the storage space. Two Velcro patches on the upper arm allow rank insignias to be attached.Product Highlightsfabric: 2-way stretch double fabrichood with 2-way adjustmentfront 'Vislon' zipper with windresistant inner flap and chin guardseamless underarm gussetergonomically pre-shaped sleevesvelcro area on both upper arms for attaching rank insigniasleeve cuffs with Velcro adjustmenthem adjustment: drawcord inside the pocket4 exterior pockets, 1 interior pocketReason-to-BuyThe CLAWGEAR Rapax Softshell Hoody is a lightweight softshell jacket with a wide range of uses. The seamless underarm gussets and the slightly pre-shaped sleeves offer complete freedom of movement. 5 outside pockets with zips and 1 inside pocket offer generous storage space. The cuffs and jacket hem can be adjusted.

Brief DescriptionThe Aviceda Mk.II Fleece Hoody is a moderately insulating fleece jacket with a hood and solid features that can be worn as an insulating layer under an outer shell layer or on its own as a midlayer. Two upper arm pockets with large Velcro patches, two hand pockets, and two inside pockets offer generous storage space. Details such as a cable port in the inside pockets or the drawstring inside the pocket bag for the hem adjustment show a well thought-out design.FitModerately slim cut, mid-layer fitFeaturesLighter weight fleece materialHoodFront zip with inner flap and chin guardElastic cuffsHem adjustment: drawstring inside the pocketPockets:'Hand pockets' with zip and welded fabric frameWelded-on upper arm pockets with zip and large Velcro patchInside pockets with zip and cable portProduct DescriptionThe Aviceda Mk.II Fleece Hoody is a lightly insulating fleece jacket with solid features. The hood, which is finished with elastic band around the face, keeps the neck and head warm. Behind the smooth-running 'Vislon' front zipper is an interior flap with chin protection at the collar. Both 'hand pockets' and the upper arm pockets with a large Velcro patch for the attachment of rank insignia offer space for stowing equipment. A cable port in the inner pockets allows a cable for headphones to be routed. The drawcord of the hem adjustment is located inside the pocket bag so that long cord loops never get in the way. The elastic cuffs fit comfortably. The Aviceda Mk.II Fleece Hoody can be worn as an insulating layer under an outer shell layer or on its own as a midlayer.Product HighlightsLighter weight fleece materialHoodHem adjustment with drawstring inside the pocket4 zipped exterior pockets with zip and 2 inside pockets with zipReason-to-BuyThe Aviceda Mk.II Fleece Hoody is a lightly insulating fleece jacket with a hood that can be worn as an insulating layer under an outer layer or on its own as a standalone. Four outside pockets and two inside pockets offer generous storage space. Details such as a cable port in the inside pockets or the internal hem adjustment show a well thought-out design.

Brief DescriptionThe Aviceda Mk.II Fleece Jacket is a moderately insulating fleece jacket with solid features that can be worn as an insulating layer under an outer shell layer or on its own as a midlayer. Two upper arm pockets with large Velcro patches, two hand pockets, and one inside pocket offer generous storage space. Details such as a cable port in the inside pockets or the drawstring inside the pocket bag for the hem adjustment show a well thought-out design.Fitmoderately slim cut, mid-layer fitFeatureslighter weight Fleece materialmicrofleece lined inner collarfront zip with inner flap and chin guardelastic cuffshem adjustment: drawstring inside the pocketPockets:2 'Hand pockets' with zip and welded fabric frame2 welded-on upper arm pockets with zip and large Velcro patch1 inside pocket with zip and cable portProduct DescriptionThe Aviceda Mk.II Fleece Jacket is a lightly insulating fleece jacket with solid features. The inner collar is lined with a short-pile microfleece that better withstands friction in the neck area. Behind the smooth-running 'Vislon' front zipper is an interior flap with chin protection at the collar. Both 'hand pockets' and the upper arm pockets with a large Velcro patch for the attachment of rank insignia offer space for stowing equipment. A cable port in the inner pocket allows a cable for headphones to be routed. The drawcord of the hem adjustment is located inside the pocket bag so that long cord loops never get in the way. The elastic cuffs fit comfortably. The Aviceda Mk.II Fleece Jacket can be worn as an insulating layer under an outer shell layer or on its own as a midlayer.Product Highlightslighter weight Fleece materialmicrofleece lining inside the collarhem adjustment with drawstring inside the pocket4 zipped exterior pockets with zip and 1 interior pocket with zipReason-to-BuyThe Aviceda Mk.II Fleece Jacket is a lightly insulating fleece jacket with solid features that can be worn as an insulating layer under an outer layer or on its own as a standalone. Four outside pockets and one interior pocket offer generous storage space. Details such as a cable port in the inside pockets or the internal hem adjustment show a well thought-out design.

Brief descriptionThe Clawgear CG Logo Hoodie is an ultra-comfortable hoodie made from a cozy knit brushed on the inside. With a classic hood, wide rib knit on cuffs and hem and the large front pocket, this hoodie has the potential to become a favorite!FitSlim fitFeaturesHood with wide drawstringsFront zip with narrow coverWide rib knit on cuffs and hemScreen-printed logo on the left chestPockets:1 large kangaroo-pocketProduct descriptionThe Clawgear CG Logo Hoodie is an ultra-comfortable hoodie made from a cozy knit brushed on the inside. The classic hood is equipped with wide drawstrings. A wide rib knit on the hem and cuffs creates a comfortable finish. The front zipper is covered with narrow flaps of main fabric on both sides. The two front pockets can be used to warm up your hands or to store items. A hoodie with the potential to become a favorite!Product highlightsHood with wide drawstringsWide rib knit on the cuffs and hemScreen-printed logo on the left chest1 large kangaroo-pocketReason-to-BuyThe Clawgear CG Logo Hoodie made from a cozy knit brushed on the inside has the potential to become a favorite piece with a classic hood, wide ribbed knit waistband and one large front pocket!

Brief DescriptionThe Clawgear CG Logo Tee is a classic cotton T-shirt with a round neck and screen-printed logo graphic. A staple item with the potential to become a favorite!Fitslim fitFeaturesRound neckScreen-printed logo on the left chestProduct DescriptionThe Clawgear CG Logo Tee is a classic cotton T-shirt with a round neck and screen-printed logo graphic. A staple item with the potential to become a favorite!Product HighlightsRound neckScreen-printed logo on the left chestReason-to-BuyThe Clawgear CG Logo Tee is a classic cotton T-shirt with a round neck and screen-printed logo graphic. A staple item with the potential to become a favorite!

Brief Description The Clawgear Low Cut Sock offers light heat retention and optimal comfort with its 'Seamless' circular knit construction and material composition with Merino Wool, combining high wearing comfort with durability. Fit // Features Seamless circular knit construction Strategically placed knit areas with different properties Optimal climate management through a combination of Nylon with Merino Wool High wearing comfort and durability Product Description The Clawgear Low Cut Sock combines Merino Wool with Nylon. The properties of both fibers combine in a perfect symbiosis: Merino Wool is insulating, antimicrobial, and can absorb moisture without feeling wet or cold. Nylon is durable and dries quickly. The 3D knitted structure placed in the heel, toe, and sole area acts like a cushion. The more breathable mesh construction supports the foot climate. The Clawgear Low Cut Sock combines high wearing comfort with durability. Also available as a longer Merino Crew Sock. Product Highlights Seamless circular knit construction Strategically placed knit areas with different properties Optimal ratio of climate management and durability with the combination of Nylon with Merino Wool Reason-to-Buy The Clawgear Low Cut Sock combines high wearing comfort thanks to the 'Seamless' knit construction with climate management and durability thanks to the combination of Nylon with Merino Wool.

Brief descriptionThe CLAWGEAR Instructor Shirt MK II was primarily developed for the use at shooting ranges and instructional services and boasts two sleeve pockets and two pockets in the side panel. The seamless underarm gusset and the material mix of cotton and lyocell offer a high level of comfort. Velcro areas allow the attachment of rank badges or name tags.The shirt combines comfort with functionality and versatility.Fitmoderately trim fittedFeaturesround neckraglan sleevesseamless underarm gussetvelcro patch on the left chest for rank badge or name tagPockets:2 upper arm pockets with zipper and large Velcro area2 smartphone pockets with cable port and loop in the side panelProduct descriptionThe CLAWGEAR Instructor Shirt MK II is a versatile short-sleeved shirt with a round neck and was developed primarily for use at shooting ranges and for instruction services. Both sleeves have a pocket that can be closed with a zipper. A pocket for a smartphone has been placed on both sides in the side panel. The seamless underarm gusset ensures friction-free comfort. A large Velcro area on both sleeve pockets and a Velcro patch on the left chest are used to attach rank insignia or name tags.The 40 percent content of quick-drying polyester fiber is combined with the skin-friendly properties of cotton. The shirt unites comfort with functionality and versatility.Product highlightsseamless underarm gussetVelcro areas for rank badge or name tag2 upper arm pockets with zipper and large Velcro area2 smartphone pockets in the side panelMaterial mix combines comfort with durabilityReason-to-BuyThe CLAWGEAR Instructor Shirt MK II combines comfort, functionality and versatility and was developed primarily for the use on shooting ranges and in instruction services. Two sleeve pockets and two pockets in the side panel offer storage space. The seamless underarm gusset and the material mix of cotton and lyocell offer a high level of comfort.

Brief DescriptionThe CLAWGEAR Off-Duty Cap is equipped with a large mesh material, circumference adjustment and microfleece material along the sweatband. In the 5 available camouflage colors, this cap is a casual addition to any outfit.FitOne-size-fits-allFeaturesstiffened visormesh material at the rearadjustable head circumferencecircumferential microfleece lining on the inner sweatbandmaterial is quick-drying and skin-friendlyProduct DescriptionThe CLAWGEAR Off-Duty Cap offers extremely good ventilation with a large mesh material covering a good 4/6 of the rear of the cap for warmer temperatures or high-cardio activities. The circumference can be individually adjusted on the back. A microfleece material along the inner sweatband ensures a high level of comfort. The classic, stiffened visor keeps the sun away from your eyes and face. In the 5 available camouflage colors, this cap is a casual addition to any outfit.Product Highlightsrear part mesh materialstepless head circumference adjustmentall-round microfleece lining on the inner sweatbandReason-to-BuyThe CLAWGEAR Off-Duty Cap is equipped with a large mesh material, circumference adjustment and microfleece material along the sweatband. In the 5 available camouflage colors, this cap is a casual addition to any outfit.

Brief DescriptionThe CLAWGEAR Lynx Fleece Jacket offers a high-performance material with Polartec® fleece and is technically well equipped with elaborated detail solutions: the hem adjustment moved to the inside, the windresistant front inner strip, and the wrist gaiters with thumb loops. Two hand pockets and two upper arm pockets are complemented by an interior pocket and offer generous storage space. The fleece hoody can be worn as an insulating layer under an outer layer or on its own as an outer layer.FitModerately slim cut, mid-layer fitFeaturesPolartec® fleece material with moderate heat retentionMedium height collarFront zip with windresistant inner flap and chin guardCuffs with integrated wrist gaiter and thumb loopHem adjustment: drawcord inside the pocketPockets:2 'hand pockets' with concealed zip2 upper arm pockets with zip and large Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Lynx Fleece Jacket is a technically well-equipped fleece jacket and is made of a Polartec® fleece material with high performance and good heat retention. The interior center front flap made of windproof coated microfleece material keeps the wind out behind the Vislon front zipper and forms a chin guard on the upper edge of the collar. The 'hand pockets' with hidden zippers and the upper arm pockets with zippers offer generous space for equipment on the outside. An inside pocket with a cable port on the left side complements the storage space. Two large Velcro surfaces on the upper arm pockets allow rank insignia to be attached. The wrist gaiters with thumb loops in extension of the cuffs are made of a fine but durable knit and also keep the wrist and back of the hand warm. The drawcord of the hem adjustment is located inside the pocket bag, so the cord loops are not visible and the outside of the jacket is kept clean. The fleece hoody can be worn as an insulating layer under an outer shell layer or as a stand-alone outer layer.Product HighlightsPolartec® fleece material with good heat retentionMedium height collarFront zip with windresistant inner flapCuffs with integrated wrist gaiters and thumb loopHem adjustment: drawcord inside the pocket2 'hand pockets'2 upper arm pockets with large Velcro area1 inside pocketReason-to-BuyThe CLAWGEAR Lynx Fleece Jacket is technically well equipped with well thought-out detail solutions such as a hood with 2-way adjustment, the hem adjustment operated from inside the pocket, the windproof front inner flap, and the wrist gaiters with thumb loops. The Polartec® fleece material offers high performance and comfort. Four outside pockets are complemented by one inside pocket and offer generous storage space. The fleece hoody can be worn as an insulating middle layer or as a stand-alone outer layer.

Brief Description The CLAWGEAR Merino Seamless Boxer Short offers a friction-free 'Seamless' construction. The material composition of Merino Wool and Nylon provides light heat retention and optimal climate management for maximum comfort in cold temperatures. As a complete underwear set in combination with the Merino Shirt SS or LS, this is the perfect next-to-skin layer within a layering system for all weather conditions and activities. Fit With the 4-way stretch of the circular knit construction with elastane, the material adapts perfectly to every body shape. The close fit allows the material to dry even faster thanks to body heat. Features seamless crotch gusset circular knit construction with 4-way stretch body mapping: strategically placed knit areas with different properties optimal climate management through a combination of nylon with merino wool 4-needle flat-lock knit seams seams only on the inside of the leg - the side is seamless friction-free construction - all product information (care, composition) is knitted-in Product Description The CLAWGEAR Merino Seamless Boxer Short is the ideal first layer on the skin in cooler temperatures when worn with the CLAWGEAR Merino Seamless Shirt LS or the CLAWGEAR Merino Seamless Shirt SS. Merino Wool and Nylon combine their properties in a perfect symbiosis: Merino Wool is insulating and antimicrobial and can absorb moisture without feeling wet or cold. Nylon is durable and dries quickly. In the yarn construction, the Nylon fiber was placed around a core of Merino Wool fibers to give the material a higher abrasion resistance. The knitted construction with elastane offers a comfortable 4-way stretch and always keeps the material close to the body, where drying is accelerated by body heat. In the body mapping construction, various knitted structures with either more breathable or slightly compressive properties were strategically placed. The knitted-in care and material instructions make the use of labels on the inside obsolete. The wide flatlock-knit seams with bulk yarns on the inside as well as the wide, double-layered waistband and the seamless crotch gusset offer completely friction-free comfort. Three-quarter-length bottoms in the same construction are also available. Product Highlights circular knit construction with 4-way stretch body mapping: strategically placed knit areas with different properties optimal ratio of climate management and durability through combination of Nylon with Merino Wool friction-free seams and construction Reason-to-Buy The CLAWGEAR Merino Seamless Boxer offers light heat retention and optimal climate management with its friction-free 'Seamless' construction and material composition with Merino Wool and is the perfect next-to-skin layer in cooler temperatures.

Brief DescriptionThe Clawgear Beanie LW is a lightweight and close-fitting hat with flat-lock seams - ideal for wearing under a helmet and for long outdoor missions, tactical training or everyday use.Fittight-fitting, in two sizesFeaturesFlatlock seamsDouble-layered fabric in the headband areaProduct DescriptionThe Clawgear Beanie LW is the ultimate all-season headwear for field and everyday use. The snug fit and flat seams make the hat the ideal choice for wearing under helmets. The double-layered material in the headband area provides an additional layer of comfort and insulation in very cold temperatures. The stretchy material keeps the head and ears warm and comfortable during long outdoor missions, tactical training or everyday use.Product HighlightsFlatlock seamsDouble-layered fabric in the headband areaReason-to-BuyThe Clawgear Beanie LW is a lightweight and close-fitting hat with flat-lock seams - ideal for wearing under a helmet and for long outdoor missions, tactical training or everyday use.

Brief Description The CLAWGEAR Merino Seamless Bottom in three-quarter length offers a friction-free 'Seamless' construction and the material composition of Merino Wool and Nylon provides moderate insulation and optimal climate management for maximum comfort in cold temperatures. As a complete underwear set, this is the perfect next-to-skin layer within a layering system in all weather conditions and activities. Fit With the 4-way stretch of the circular knit construction with elastane, the material adapts perfectly to every body shape. The close fit allows the material to dry even faster thanks to body heat. The 3/4 leg length allows you to wear boots without having to move up the hem and causing creases. Features three-quarter length seamless crotch gusset circular knit construction with 4-way stretch body mapping: strategically placed knit areas with different properties optimal climate management with the combination of Nylon and Merino Wool 4-needle flatlock seams seams only on the inside of the leg - the side is seamless friction-free construction - all product information (care, composition) is knitted-in Product Description The CLAWGEAR Merino Seamless Bottom in three-quarter length is the ideal next-to-skin layer in cold temperatures when worn with the CLAWGEAR Merino Seamless Shirt LS or the CLAWGEAR Merino Seamless Shirt SS. Merino Wool and Nylon combine their properties in a perfect symbiosis: Merino Wool is insulating and antimicrobial and can absorb moisture without feeling wet or cold. Nylon is durable and dries quickly. In the yarn construction, the Nylon fiber was placed around a core of Merino Wool fibers to give the material a higher abrasion resistance. The knitted construction with elastane offers comfortable 4-way stretch and always keeps the material close to the body, where drying is accelerated by body heat. In the body mapping construction, various knitted structures with either more breathable or slightly compressive properties were strategically placed. The knitted-in care and material instructions make the use of labels on the inside obsolete. The wide flatlock-knit seams with bulk yarns on the inside as well as the wide, double-layered waistband and the seamless crotch gusset offer completely friction-free comfort. Boxer shorts with the same construction are also available. Product Highlights circular knit construction with 4-way stretch body mapping: strategically placed knit areas with different properties optimal ratio of climate management and durability through combination of Nylon with Merino Wool friction-free seams and construction Reason-to-Buy The CLAWGEAR Merino Seamless Bottom offers light heat retention and optimal climate management with its friction-free 'Seamless' construction and material composition with Merino Wool and is the perfect next-to-skin layer in cooler temperatures.

Brief Description CLAWGEAR Merino Seamless Shirt - SS offers moderate insulation and optimal climate management for maximum comfort in cooler temperatures with its friction-free 'Seamless' construction and the material composition of Merino Wool and Nylon. As a complete underwear set, this is the perfect next-to-skin layer within a layering system in all weather conditions and activities. Fit Thanks to the 4-way stretch of the circular knit construction with elastane, the material adapts perfectly to every body shape. The close-fitting design allows the material to dry even faster thanks to body heat. Features Round neck Circular knit construction with 4-way stretch Body mapping: strategically placed knit areas with different properties Optimal climate management through a combination of nylon with merino wool 4-needle flat knit seams Raglan sleeves Friction-free processing - all product information (care, composition) is knitted-in Product Description CLAWGEAR Merino Seamless Shirt - SS offers the optimal next-to-skin layer in cold temperatures in combination with the CLAWGEAR Merino Seamless Boxer Shorts or the Merino Seamless Bottom. Merino Wool and Nylon combine their properties in a perfect symbiosis: Merino Wool is insulating and antimicrobial and can absorb moisture without feeling wet or cold. Nylon is durable and dries quickly. In the yarn construction, the Nylon fiber was placed around a core of Merino Wool fibers to give the material a higher abrasion resistance. The knitted construction with elastane offers comfortable 4-way stretch and always keeps the material close to the body, where drying is further accelerated by body heat. With the body mapping construction, various knitted structures with either more breathable or slightly compressive properties were strategically placed. The knitted-in care and material information make the use of labels on the inside obsolete. The wide flatlock-knit seams with bulk yarns on the inside offer completely friction-free comfort. This shirt is also available in a long-sleeved version. Product Highlights Circular knit material construction with 4-way stretch Body mapping: strategically placed knit areas with different properties Optimal ratio of climate management and durability with the combination of Nylon and Merino Wool Friction-free seams and processing Reason-to-Buy CLAWGEAR Merino Seamless Shirt - SS offers with its seamless knit construction and material composition of Merino Wool and Nylon the perfect next-to-skin layer in cold temperatures: moderate heat retention and optimal climate management for maximum comfort.

Brief DescriptionThe CLAWGEAR CG Beanie with pleasantly soft fleece lining offers excellent comfort and performance for deployments and leisure.Fit//FeaturesFleece liningKnitted logoProduct DescriptionThe CLAWGEAR CG Beanie is lightweight with a pleasantly soft fleece lining. Excellent comfort and performance - ideal for use and leisure.Product HighlightsFleece liningKnitted logoReason-to-BuyThe CLAWGEAR CG Beanie with pleasantly soft fleece lining offers excellent comfort and performance for deployments and leisure.

Brief Description The CLAWGEAR Boonie Hat is the classic and versatile headgear with many functional details to keep out the sun and rain.Fit //Features Ventilation eyelet on both sides Perimeter adjustment with drawstring Chin strap Circumferential webbing with storage loops Velcro patches to attach IFF indicators or a V-LITE® Internal compartment for storing credit or key cards Quick-drying and skin-friendly material Product Description The classic CLAWGEAR Boonie Hat is a wide-brimmed hat that shields your head from rain and sunlight. The blend of 50% cotton and 50% polyester offers both: a comfortable fit and the quick-drying properties of synthetic fibers. The hat can be adjusted to the individual head circumference using the drawstring. The chin strap prevents the hat from slipping and keeps it in place even in windy conditions. Ventilation eyelets on both sides help to release excess heat and moisture from the inside of the hat. Small items of equipment can be secured to the loops of the circumferential webbing. Velcro patches on the top and at the rear allow the attachment of IFF indicators or a V-LITE®. Credit or key cards can be stored in a compartment on the inside.Product Highlights Ventilation eyelets Perimeter adjustment with drawstring Internal compartment to store credit or key cards Circumferential webbing with storage loops Velcro patches to attach IFF indicators or a V-LITE® Reason-to-Buy Versatile headgear with many functional details to keep out the sun and rain.This Boonie Hat is an essential piece of gear for anyone spending extended periods outdoors, offering both protection and practicality for all your adventures.

Brief Description The CLAWGEAR Merino Seamless Shirt - LS offers moderate insulation and optimal climate management for maximum comfort in cooler temperatures with its friction-free 'Seamless' construction and the material composition of Merino Wool and Nylon. As a complete underwear set, this is the perfect next-to-skin layer within a layering system in all weather conditions and activities. Fit Thanks to the 4-way stretch of the circular knit construction with elastane, the material adapts perfectly to every body shape. The close-fitting design allows the material to dry even faster thanks to body heat. Features Round neck Circular knit construction with 4-way stretch Body mapping: strategically placed knit areas with different properties Optimal climate management through a combination of nylon with merino wool 4-needle flat knit seams Raglan sleeves Friction-free processing - all product information (care, composition) is knitted-in Product Description The CLAWGEAR Merino Seamless Shirt - LS offers the optimal next-to-skin layer in cold temperatures in combination with the CLAWGEAR Merino Seamless Boxer Shorts or the Merino Seamless Bottom. Merino Wool and Nylon combine their properties in a perfect symbiosis: Merino Wool is insulating and antimicrobial and can absorb moisture without feeling wet or cold. Nylon is durable and dries quickly. In the yarn construction, the Nylon fiber was placed around a core of Merino Wool fibers to give the material a higher abrasion resistance. The knitted construction with elastane offers comfortable 4-way stretch and always keeps the material close to the body, where drying is further accelerated by body heat. With the body mapping construction, various knitted structures with either more breathable or slightly compressive properties were strategically placed. The knitted-in care and material information make the use of labels on the inside obsolete. The wide flatlock-knit seams with bulk yarns on the inside offer completely friction-free comfort. This shirt is also available in a short-sleeved version. Product Highlights Circular knit material construction with 4-way stretch Body mapping: strategically placed knit areas with different properties Optimal ratio of climate management and durability with the combination of Nylon and Merino Wool Friction-free seams and processing Reason-to-Buy The CLAWGEAR Merino Seamless Shirt - LS offers with its seamless knit construction and material composition of Merino Wool and Nylon the perfect next-to-skin layer in cold temperatures: moderate heat retention and optimal climate management for maximum comfort.

Brief Description The Clawgear Crew Sock offers light heat retention and optimal comfort with its 'Seamless' circular knit construction and material composition with Merino Wool, combining high wearing comfort with durability. Fit // Features seamless circular knit construction strategically placed knit areas with different properties optimal climate management through a combination of Nylon with Merino Wool high wearing comfort and durability Product Description The Clawgear Crew Sock combines Merino Wool with Nylon. The properties of both fibers combine in a perfect symbiosis: Merino Wool is insulating, is antimicrobial and can absorb moisture without feeling wet or cold. Nylon is durable and dries quickly. The 3D knitted structure placed in the heel, toe and sole area acts like a cushion. The more breathable mesh construction supports the foot climate. The Clawgear Crew Sock combines high wearing comfort with durability. Also available as a longer Low Cut Sock. Product Highlights seamless circular knit construction strategically placed knit areas with different properties optimal ratio of climate management and durability with the combination of Nylon with Merino Wool Reason-to-Buy The Clawgear Crew Sock combines high wearing comfort thanks to the 'Seamless' knit construction with climate management and durability thanks to the combination of Nylon with Merino Wool.

Brief DescriptionThe CLAWGEAR Lynx Fleece Hoody offers a high-performance material with Polartec® fleece and is technically well equipped with elaborated detail solutions: a hood with 2-way adjustment, the hem adjustment moved to the inside, the windproof front inner strip, and the wrist gaiters with thumb loops. Two hand pockets and two upper arm pockets are complemented by an interior pocket and offer generous storage space. The fleece hoody can be worn as an insulating layer under an outer layer or on its own as an outer layer.Fitmoderately slim cut, mid-layer fitFeaturesPolartec® fleece material with moderate heat retentionhood with 2-way adjustmentfront zip with windproof inner flap and chin guardcuffs with integrated wrist gaiter and thumb loophem adjustment: drawcord inside the pocketPockets:2 'hand pockets' with concealed zip2 upper arm pockets with zip and large Velcro area to attach rank badges1 inside pocket on the left side with zip and cable portProduct DescriptionThe CLAWGEAR Lynx Fleece Hoody is a technically well-equipped fleece jacket and is made of a Polartec® fleece material with high performance and good heat retention. On the 2-way adjustment of the hood, the face parameter adjustment has been moved to the inside. Also, the drawcord of the hem adjustment is also located inside the pocket bag, so the cord loops are not visible, and the exterior of the jacket is kept clean. The interior center front flap made of windproof coated microfleece material keeps the wind out behind the Vislon front zipper and forms a chin guard on the upper edge of the collar. The 'hand pockets' with hidden zippers and the upper arm pockets with zippers offer generous space for equipment on the outside. An inside pocket with a cable port on the left side complements the storage space. Two large Velcro surfaces on the upper arm pockets allow rank insignia to be attached. The wrist gaiters with thumb loops in extension of the cuffs are made of a fine but durable knit and also keep the wrist and back of the hand warm. The fleece hoody can be worn as an insulating layer under an outer shell layer or as a stand-alone outer layer.Product HighlightsPolartec® fleece material with good heat retentionhood with 2-way adjustmentfront zip with windproof inner stripcuffs with integrated wrist gaiters and thumb loophem adjustment: drawcord inside the pocket2 'hand pockets'2 upper arm pockets with large Velcro area1 inside pocketReason-to-BuyThe CLAWGEAR Lynx Fleece Hoody is technically well equipped with well-thought-out detail solutions such as a hood with 2-way adjustment, the hem adjustment operated from inside the pocket, the windproof front inner flap, and the wrist gaiters with thumb loops. The Polartec® fleece material offers high performance and comfort. Four outside pockets are complemented by one inside pocket and offer generous storage space. The fleece hoody can be worn as an insulating middle layer or as a stand-alone outer layer.

Developed by the D3O - Delta Three Oscar, the P5s are elbow pads that use revolutionary technology based on non-Newtonian fluid principles. The anatomically shaped elbow pads are injection-molded from advanced polymers that mimic the principles of non-Newtonian fluids. This means that the material viscosity depends on the applied force, resulting in the product's unique softness while simultaneously providing superior shock and blunt trauma protection for the wearer. The used material is temperature stable and will function normally in a wide range of climates. To further increase the wearing comfort, the pads are manufactured with holes that increase the airflow and provide improved ventilation. The elements are inserted into dedicated pockets in the sleeves. Thanks to their carefully designed shape and increased flexibility, they guarantee proper fitment and compatibility with a multitude of brands and shirt models. The Delta Three Oscar products have been field-tested by soldiers in combat conditions, making them ideal for military and law enforcement applications.

Developed by the D3O - Delta Three Oscar, the P7s are knee pads that use revolutionary technology based on non-Newtonian fluid principles. The anatomically shaped knee pads are injection-molded from advanced polymers that mimic the principles of non-Newtonian fluids. This means that the material viscosity depends on the applied force, resulting in the product's unique softness while simultaneously providing superior shock and blunt trauma protection for the wearer. The used material is temperature stable and will function normally in a wide range of climates. To further increase the wearing comfort, the pads are manufactured with holes that increase the airflow and provide improved ventilation. The elements are inserted into dedicated pockets in the legs. Thanks to their carefully designed shape and increased flexibility, they guarantee proper fitment and compatibility with a multitude of brands and shirt models. The additional reinforced layer of polymer offers increased protection and durability of the product. The Delta Three Oscar products have been field-tested by soldiers in combat conditions, making them ideal for military and law enforcement applications.

Brief descriptionEquipped with 3 Velcro patches, ventilation openings and an all-round microfleece sweatband inside, the CLAWGEAR Operator Cap complements both a functional uniform and a casual everyday outfit.FitFlexfit in 2 sizesFeaturesstiffened visor4 embroidered ventilation openings3 Velcro areas for attaching IFF indicators or a V-LITE®all-round microfleece lining on the inner sweatbandquick-drying and skin-friendly main fabricProduct descriptionWith the stiffened visor, the CLAWGEAR Operator Cap keeps the sun away from your eyes and face. IFF indicators or a V-LITE® can be attached to 3 Velcro areas. Microfleece material along the inner sweatband ensures high wearing comfort. This cap complements both a functional uniform and a casual everyday outfit.Product highlights4 embroidered ventilation openingsVelcro areas for attaching IFF indicators or a V-LITE®All-round microfleece lining on the inner sweatbandquick-drying and skin-friendly main fabricReason-to-BuyEquipped with 3 Velcro patches, ventilation openings and an all-round microfleece sweatband inside, the CLAWGEAR Operator Cap complements both a functional uniform and a casual everyday outfit.