Handguards

CG15 HANDGUARD The Clawgear CG15 Handguard is designed for shooters who demand the highest precision and flexibility. Available in two lengths – 9.5 inches and 13.5 inches – this free-floating handguard is the optimal choice for various barrel lengths and applications. With its lightweight yet highly durable construction, the CG15 Handguard is perfect for tactical, military, and competitive use. The STANAG 4694 Picatinny top rail and M-LOK interfaces at 45° and 90° angles allow for the flexible and secure mounting of accessories such as lasers, lights, and vertical grips. Made from high-strength aluminum and finished with a matte black hard-anodized coating, this handguard offers maximum corrosion resistance and durability. Installing the CG15 Handguard on an AR15 requires changing the barrel nut. The necessary barrel nut, made from hardened steel, is included in the package to ensure a reliable and precise installation. Focus on What Matters Optimal Length Options: Available in 9.5 inches and 13.5 inches to fit various AR15 barrel lengths. Free-Floating Design: Reduces barrel interference and enhances accuracy. Enhanced M-LOK Interfaces: Compatible with all M-LOK accessories following Magpul standards. High-Quality Construction: Made from hardened aluminum for maximum durability and wear resistance. Easy Installation: The included hardened steel barrel nut allows for secure mounting. Versatile Applications: Ideal for tactical, law enforcement, and competitive shooting scenarios. Technical Specifications – CG15 HANDGUARD Model9.5 inches13.5 inches Weight350 g420 g Length9.5 inches (241 mm)13.5 inches (343 mm) Width39 mm Height51.5 mm CompatibilityAR15 Mil-Spec Upper Whether for dynamic operations or competitive shooting, the Clawgear CG15 Handguard delivers outstanding stability, ergonomic excellence, and uncompromising precision.

Clawgear M-LOK Rail 45° – 3 Slot The 45° M-LOK Rail with three Picatinny slots is designed for users who aim to expand their weapon platform in a targeted and space-saving manner. It enables offset mounting of light modules, control units, or other accessories – without interfering with the primary handling area of the weapon.   A continuous opening within the Picatinny profile allows for protected and clean cable routing, especially when using wired switches or light systems. The integrated M-LOK interface offers additional expansion options and allows for flexible adaptation to various mission requirements. The included mounting screws feature a clamping surface coating, which supports easy positioning and secure installation on M-LOK handguards. Manufactured from high-strength aluminum and hard anodized according to MIL-8625-F Type III, Class II, the rail meets the highest standards of durability and corrosion resistance – even under demanding conditions. In combination with the AUG M-LOK Handguard by Clawgear, the rail can also serve as a compact heatshield – a practical additional feature for specific applications.   Technical Specifications – M-LOK Rail 45° Mounting typeM-LOK, 45° offset Length3 Picatinny slots MaterialHigh-strength aluminum FinishHard anodized, MIL-8625-F Type III, Class II Cable managementContinuous opening along the rail Included in deliveryM-LOK Rail 45°, 2 screws and M-LOK T-nuts each, hex key

CG15 HANDGUARD The Clawgear CG15 Handguard is designed for shooters who demand the highest precision and flexibility. Available in two lengths – 9.5 inches and 13.5 inches – this free-floating handguard is the optimal choice for various barrel lengths and applications. With its lightweight yet highly durable construction, the CG15 Handguard is perfect for tactical, military, and competitive use. The STANAG 4694 Picatinny top rail and M-LOK interfaces at 45° and 90° angles allow for the flexible and secure mounting of accessories such as lasers, lights, and vertical grips. Made from high-strength aluminum and finished with a matte black hard-anodized coating, this handguard offers maximum corrosion resistance and durability. Installing the CG15 Handguard on an AR15 requires changing the barrel nut. The necessary barrel nut, made from hardened steel, is included in the package to ensure a reliable and precise installation. Focus on What Matters Optimal Length Options: Available in 9.5 inches and 13.5 inches to fit various AR15 barrel lengths. Free-Floating Design: Reduces barrel interference and enhances accuracy. Enhanced M-LOK Interfaces: Compatible with all M-LOK accessories following Magpul standards. High-Quality Construction: Made from hardened aluminum for maximum durability and wear resistance. Easy Installation: The included hardened steel barrel nut allows for secure mounting. Versatile Applications: Ideal for tactical, law enforcement, and competitive shooting scenarios. Technical Specifications – CG15 HANDGUARD Model9.5 inches13.5 inches Weight350 g420 g Length9.5 inches (241 mm)13.5 inches (343 mm) Width39 mm Height51.5 mm CompatibilityAR15 Mil-Spec Upper Whether for dynamic operations or competitive shooting, the Clawgear CG15 Handguard delivers outstanding stability, ergonomic excellence, and uncompromising precision.

AK47 Short Slick Handguard M-LOK The Clawgear AK47 Short Slick Handguard is the most compact model in the modular handguard series for AK platforms with stamped or milled receivers. It is designed for applications that require low weight, a short front-end profile, and enhanced weapon maneuverability – such as CQB environments or confined operational spaces. Machined from high-strength 6061 aluminum and hard anodized to MIL-SPEC Type III, the handguard offers excellent durability with minimal weight. The matte, non-glare surface reduces unwanted reflections. The integrated M-LOK system allows mounting of various accessories such as Picatinny rails, vertical grips, or lighting tools. A QD sling attachment point is integrated into the rear section. The shortened design reduces overall weapon weight and front-end load, making it ideal for fast target acquisition and dynamic shooting situations. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length160 mm Weight160 g

M-LOK Picatinny Rail – 10 Slots + QD The Clawgear M-LOK Picatinny Rail with 10 slots and integrated QD socket is designed for professional users who require a robust, modular, and corrosion-resistant mounting solution. Fully M-LOK compatible, it features a continuous Picatinny profile in compliance with NATO STANAG 4694 / Mil-Std 1913—ideal for mounting optics, grips, lasers, or light modules. This variant includes a Quick Detach (QD) socket for direct attachment of push-button sling swivels, making it ideal for front sling attachment or bipod mounting. Made from high-strength aluminum and hard anodized to MIL-SPEC Type III, the rail provides maximum durability and wear resistance. The included stainless steel T-Nuts prevent corrosion even after repeated removal. Chamfered edges reduce the risk of snagging on gear or clothing. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeM-LOK Picatinny Rail with QD socket Slots10 slots Length4.88″ / 124 mm MaterialHigh-strength aluminum, stainless steel T-Nuts FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), M-LOK compatible QD FeatureIntegrated QD socket for push-button sling swivels Weight42 g IncludedMounting screws & stainless steel T-Nuts FeaturesChamfered edges, corrosion resistant, tool-free disassembly

Keymod Picatinny Rail – 7 Slots The Clawgear Keymod Picatinny Rail with 7 slots is a compact accessory platform for use on Keymod-compatible handguards. It features a NATO STANAG 4694 / Mil-Std 1913 compliant Picatinny interface, ideal for mounting lights, remote switches, or lasers. Made from high-strength aluminum and hard anodized to MIL-SPEC Type III, the rail is optimized for durability and corrosion resistance. Included stainless steel hardware ensures long-term reliability even under demanding use. Chamfered edges minimize snag hazards during handling and deployment. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeKeymod Picatinny Rail (without QD) Slots7 slots Length3.07″ / 78 mm MaterialHigh-strength aluminum, stainless steel hardware FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), Keymod compatible Weight31 g IncludedMounting screws & stainless steel T-Nuts FeaturesCompact form, chamfered edges, corrosion resistant

Keymod Picatinny Rail – 9 Slots The Clawgear Keymod Picatinny Rail with 9 slots is designed for professional users requiring a robust mounting interface on Keymod-compatible platforms. It offers a stable and repeatable interface for tactical accessories such as lights, vertical grips, or laser modules. The Picatinny profile is compliant with NATO STANAG 4694 / Mil-Std 1913. Machined from high-strength aluminum and MIL-SPEC Type III hard anodized, the rail delivers excellent mechanical strength and abrasion resistance. Included stainless steel hardware ensures long-term corrosion resistance—even with repeated use. Chamfered edges reduce snag hazards during dynamic operations. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeKeymod Picatinny Rail (without QD) Slots9 slots Length3.86″ / 98 mm MaterialHigh-strength aluminum, stainless steel hardware FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), Keymod compatible Weight38 g IncludedMounting screws & stainless steel T-Nuts FeaturesChamfered edges, corrosion resistant

AK47 Gas Tube Cover The Clawgear AK47 Gas Tube Cover is a functional enhancement for use exclusively with the Clawgear AK Slick Handguard. It protects the gas tube while adding a MIL-STD 1913 / STANAG 4694 Picatinny top rail, enabling the mounting of IR devices, lights, or backup sights in line with the bore. Manufactured from high-strength aluminum and MIL-SPEC Type III hard anodized, this cover offers maximum durability with minimal weight. The matte black finish reduces unwanted reflections, supporting tactical use in variable lighting conditions. Mounts securely with guided fit when combined with the Clawgear AK Slick Handguard. Note: This component is only compatible with the Clawgear AK Slick Handguard. It cannot be used standalone. Technical Specifications TypeGas tube cover with Picatinny top rail MaterialHigh-strength aluminum, MIL-SPEC Type III hard anodized FinishMatte black, anti-reflective, corrosion resistant Mounting InterfacePicatinny (MIL-STD 1913 / STANAG 4694), top CompatibilityOnly usable with Clawgear AK Slick Handguards Weight80 g Length100 mm Width34.6 mm Height37.5 mm

Keymod Picatinny Rail – 3 Slots The Clawgear Keymod Picatinny Rail with 3 slots is the most compact version in the series, ideal for mounting remote switches, compact lights, or backup sights on Keymod-compatible handguards. The Picatinny profile follows NATO STANAG 4694 / Mil-Std 1913 specifications. Machined from high-strength aluminum and MIL-SPEC Type III hard anodized, this rail offers outstanding durability at minimal weight. The included stainless steel hardware ensures long-term corrosion resistance, even with repeated mounting cycles. Chamfered edges reduce snag hazards and improve handling. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeKeymod Picatinny Rail (without QD) Slots3 slots Length1.20″ / 30.5 mm MaterialHigh-strength aluminum, stainless steel hardware FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), Keymod compatible Weight18 g IncludedMounting screws & stainless steel T-Nuts FeaturesUltra-compact design, snag-free edges, corrosion resistant

AUG Heatshield M-LOK The Clawgear AUG Heatshield is designed as an accessory for the AUG M-LOK Handguard. During rapid fire, the gas block of the AUG can become extremely hot. This heatshield protects the user from accidental burns caused by direct contact and hot escaping gases—enhancing safe weapon handling. Made from high-strength aluminum and MIL-SPEC Type III hard anodized, the heatshield combines outstanding durability with minimal weight. It attaches directly to the M-LOK interface of the handguard and can be removed just as easily when not needed. Technical Specifications TypeHeatshield for gas block MaterialHigh-strength aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-reflective, corrosion-resistant Mounting SystemM-LOK compatible CompatibilityOnly compatible with Clawgear AUG M-LOK Handguard Weight27 g

AK47 Medium Slick Handguard M-LOK The Clawgear AK47 Medium Slick Handguard is the mid-length version of the modular handguard series for AK platforms with stamped or milled receivers. It provides a balanced combination of mounting space, structural stability, and overall weight, making it ideal for users seeking both versatility and weapon handling performance. Machined from high-strength 6061 aluminum and MIL-SPEC Type III hard anodized, the handguard offers excellent durability with reduced weight. The matte, non-reflective surface minimizes light signature. The integrated M-LOK system enables direct attachment of accessories like Picatinny rails, grips, or lights. A QD sling mounting point is integrated into the rear section. This medium-length version offers an ideal compromise between maneuverability and accessory mounting area—suitable for both tactical and dynamic shooting applications. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length263 mm Weight250 g

AK47 Long Slick Handguard M-LOK The Clawgear AK47 Long Slick Handguard is the longest version in the modular series for AK platforms with stamped or milled receivers. Designed for users who require maximum accessory mounting space and extended grip options, it is ideal for precision shooting techniques and tactical applications. Machined from high-strength 6061 aluminum and MIL-SPEC Type III hard anodized, the handguard delivers exceptional durability and dimensional accuracy. Its matte, non-glare finish helps reduce unwanted reflections. The integrated M-LOK system enables secure mounting of Picatinny segments, lights, and vertical grips. A QD sling mount is integrated at the rear section. This extended-length variant provides maximum flexibility for accessory layout and modern shooting techniques without compromising weapon balance. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length383 mm Weight292 g

AUG MSM Side Rail – 10 Slots The Clawgear 10-slot Side Rail is a longer variant designed for extended accessory configurations on the AUG Modular Scope Mount. It offers increased space for mounting modular accessories such as IR aiming devices, laser/light combos, or backup optics—ideal for users with more advanced mission-specific requirements. Machined from high-strength aluminum and hard anodized to MIL-8625-F Type III, Class II, the rail provides outstanding resistance to wear and corrosion. Its 10-slot NATO STANAG 4694 interface ensures secure and repeatable mounting for compatible accessories. Technical Specifications TypeSide Rail for AUG Modular Scope Mount Mounting SystemPicatinny (10 Slots, NATO STANAG 4694) MaterialHigh-strength aluminum, hard anodized (MIL-8625-F Type III, Class II) FinishMatte black, corrosion and wear resistant CompatibilityClawgear AUG Modular Scope Mount

AUG M-LOK Handguard The Clawgear AUG M-LOK Handguard is designed for professional users who demand maximum modularity, low weight, and high durability on the AUG platform. Machined from high-strength aluminum and hard anodized to MIL-8625-F Type III, Class II, it offers outstanding structural integrity while remaining lightweight – ideal for operational use under harsh conditions. With full M-LOK compatibility across 12 mounting positions, the handguard supports mission-specific accessories such as vertical grips, lights, IR modules, and lasers. Its slim, ergonomic design improves weapon control and remains fully functional when used in combination with suppressors, compensators, or flash hiders. For flat top AUG configurations, the Clawgear AUG A3 Top Rail is required to ensure full compatibility. Technical Specifications TypeFree-floating handguard Material6061 aluminum, MIL-8625-F Type III, Class II hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible, 12 mounting slots ErgonomicsOne-piece low-profile design for enhanced control Length138.4 mm Width56 mm Height47 mm Weight142 g ColorBlack (hard anodized) CompatibilitySteyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG SA, AUG LMG, MSAR STG-556Not compatible with: AUG A3, AUG Z A3, AUG 9mm, AUG A3 SA POLICE/SWAT

M-LOK Picatinny Rail – 9 Slots The Clawgear M-LOK Picatinny Rail with 9 slots is built for professional users who need a rugged and modular mounting platform for tactical accessories. Fully M-LOK compatible, it features a continuous Picatinny profile according to NATO STANAG 4694 / Mil-Std 1913 – ideal for attaching lights, vertical grips or switches. Made from high-strength aluminum and MIL-SPEC Type III hard anodized, the rail offers excellent durability. The included stainless steel T-Nuts provide corrosion resistance even after frequent removal. Chamfered edges reduce snagging on gear or gloves. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeM-LOK Picatinny Rail (without QD) Slots9 slots Length3.86″ / 98 mm MaterialHigh-strength aluminum, stainless steel T-Nuts FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), M-LOK compatible Weight38 g IncludedMounting screws & stainless steel T-Nuts FeaturesChamfered edges, corrosion resistant

M-LOK T-Nut Replacement Set The Clawgear M-LOK T-Nut Replacement Set provides premium-grade mounting hardware for all M-LOK compatible accessories. It is ideal for initial setups or as spare parts in case of lost or damaged hardware. The set includes two corrosion-resistant stainless steel T-nuts and two pairs of screws in different lengths to match various accessory thicknesses. The stainless steel construction ensures maximum durability without coatings that could wear off or chip during repeated mounting and dismounting. Installation Note: Do not exceed 4 Nm (35 in/lb) torque when tightening. If no torque tool is available, use the short end of the Allen key for better control. Included in the Set 2× M-LOK T-Nuts (stainless steel) 2× Short screws 2× Long screws Color Black (standard – hard anodized)

M-LOK Picatinny Rail – 3 Slots The Clawgear M-LOK Picatinny Rail with 3 slots is the most compact version of the series—ideal for mounting small tactical components such as remote switches, compact lights, or backup sights. The Picatinny profile conforms to NATO STANAG 4694 / Mil-Std 1913 and is fully M-LOK compatible. Made from high-strength aluminum with a MIL-SPEC Type III hard anodized finish, the rail offers exceptional wear resistance. Stainless steel T-Nuts ensure long-term corrosion resistance, even after repeated disassembly. Its low-profile design minimizes snag hazards during operational use. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeM-LOK Picatinny Rail (without QD) Slots3 slots Length1.20″ / 30.5 mm MaterialHigh-strength aluminum, stainless steel T-Nuts FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), M-LOK compatible Weight18 g IncludedMounting screws & stainless steel T-Nuts FeaturesUltra-compact, corrosion resistant, snag-free design

M-LOK Picatinny Rail – 5 Slots The Clawgear M-LOK Picatinny Rail with 5 slots is an ultra-compact mounting platform for tactical accessories on M-LOK-compatible handguards. The Picatinny profile complies with NATO STANAG 4694 / Mil-Std 1913 and is ideal for attaching lights, remote switches, or backup sights. Machined from high-strength aluminum and MIL-SPEC Type III hard anodized, the rail offers outstanding durability. Stainless steel T-Nuts ensure corrosion resistance, even after frequent use. Chamfered edges reduce the risk of snagging on gear or gloves. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeM-LOK Picatinny Rail (without QD) Slots5 slots Length2.05″ / 52 mm MaterialHigh-strength aluminum, stainless steel T-Nuts FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), M-LOK compatible Weight24 g IncludedMounting screws & stainless steel T-Nuts FeaturesCompact design, corrosion resistant, chamfered edges

M-LOK Picatinny Rail – 7 Slots The Clawgear M-LOK Picatinny Rail with 7 slots is a compact and tactical solution for users who require a lightweight and robust mounting platform. The continuous Picatinny profile complies with NATO STANAG 4694 / Mil-Std 1913 and is fully M-LOK compatible—perfect for mounting lights, switches or laser modules. Constructed from high-strength aluminum and hard anodized to MIL-SPEC Type III, the rail is built for durability. The included stainless steel T-Nuts offer corrosion resistance and allow repeatable installation. Chamfered edges improve handling and reduce snag hazards on gear or clothing. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeM-LOK Picatinny Rail (without QD) Slots7 slots Length3.07″ / 78 mm MaterialHigh-strength aluminum, stainless steel T-Nuts FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), M-LOK compatible Weight31 g IncludedMounting screws & stainless steel T-Nuts FeaturesChamfered edges, corrosion resistant